Panasonic DX-600 appendix 107, Manual Number Dialling

Sending Documents via Telephone Line Memory Transmission

Manual Number Dialling

To dial the telephone number manually, follow the steps below.

1

2

3

Set document(s) face down.

Enter a telephone number from the keypad. (Up to 36 digits)

You can also designate more that one destination.

Ex: 5 5 5 1 2 3 4

The document is stored into memory with a file number. Then starts dialling the telephone number immediately after storing the first page. (See Note 3)

The remaining page(s) continue to store into memory.

ENTER STATION(S) THEN PRESS START 00%

TEL. NO. 5551234❚

* STORE * NO.002

PAGES=001 05%

*DIALLING * NO.002 5551234

Basic Operations

NOTE	1. If you need a special access number to get an outside line, dial it first then press		to
		PAUSE
	enter a pause (represented by a "-") before dialling the full number.
	Ex: 9 PAUSE 5551234

2.If you are using Pulse dialling and you wish to change to Tone dialling in the middle of dialling,

press (represented by a "/").

The dialling mode will be changed from Pulse to Tone after dialling the digit "/".

Ex: 9 PAUSE * 5551234

3.This feature is called “Quick Memory Transmission”. If you wish to store all the document(s) into memory first before transmitting, change the Fax Parameter No. 82 (QUICK MEMORY XMT) to “Invalid”. (See page 81)

107