Panasonic DX-600 appendix Basic Transmission Settings, Verification Stamp, Stamp OFF

Basic Transmission Settings

Verification Stamp

The Verification Stamp helps you to confirm successful transmissions by stamping the bottom of each successfully transmitted page with a small mark.

Press

STAMP

to:

STAMP = Off STAMP = On

STAMP:	STAMP:
ON	OFF

NOTE

1.When you store a document in memory, the Verification Stamp will stamp on the document if it is successfully stored in memory. In this case the Verification Stamp is not a confirmation that the document was successfully transmitted. If you wish to disable the use of the Verification Stamp when storing document in memory, change the setting of Fax Parameter No. 28. (See page 79)

2.To change the preset Verification Stamp position, change the setting of Fax Parameter No. 04. (See page 78)

88