Security code (5 digits)
By default, the security code is not set. You can use the security code to
–protect your mobile phone against unau- thorised use even if another mobile phone’s SIM card is used
–restore the factory settings of your mo- bile phone
–switch security control by security code off or on
–change the security code itself.
If you enter an incorrect security code 10 times in succession, the mobile phone is locked for one hour, before you have 10 more attempts and so on. Only emergen- cy calls can be made during this hour. If all attempts fail, contact the manufacturer (see at the end of this manual).
Barring code (4 digits)
The barring code (also called ’network pass- word’) is supplied with the SIM card from your service provider and will be needed to handle the security with the network. It is possible to lock some mobile phone features that interact with the network. The barring code is required to
–activate or deactivate the barring of calls
–change the barring code itself.
The procedures after having entered an in- correct barring code vary depending on ser- vice providers.
Phone/Call settings
Network
Sound & Alert
Handling PINs, security code and barring code (6-3/6-4/6-5)
Activate/deactivate PIN request (6-3)
You can switch PIN control off or on, but beware of the risk of unauthorised use when PIN control is switched off!
Select Menu > Security > PIN Code
The current setting is displayed
Press Change
Press Save
Enter PIN
Press OK
Activate/deactivate security code (6-5)
The security code can be deactivated and activated again:
Select Menu > Security > Security Code The current setting is displayed
Press Change
Press Save
Enter security code
Press OK
Note:
There is no preset security code in your new mobile phone, you are advised to set it, when you select this function for the first time.
Statistics/Info
GPS facilities
31 | WAP Internet |
| |
|
|
