During a call Phone number lists Getting started
Diversion
Security settings SMS/Broadcast
Initial steps
Inserting the SIM card
The SIM card (Subscriber Identity Module) is the ’plug’ to the network and provides the phone number, memory for storing phone numbers and short text messages (SMS).
To insert the SIM card:
1.Switch off the mobile phone before re- moving the battery and inserting the SIM card
2.Lift the battery from the back of the mo- bile phone and insert the SIM card as shown in the pictures below
Lift
Press
SIM card
2
Connect the charger and charge the battery
You should charge the battery supplied with the mobile phone as soon as possible to ob- tain full battery charge.
To charge the battery:
1.Fit the country specific adapter into the charger
2.Plug the charger plug into the charger socket
3.Connect the charger to an AC source
Press to fit adapter
Charger socket
Charger plug
While the battery is charging you see the
6symbol changing to 
cyclically. The battery is fully charged after 2 hours. The charger stops charging automatically when the battery is full. As long as the charger is not disconnected it restarts charging after a while to keep the battery fully charged.
Further information on using charger and battery is given on page 62.
You may still use the mobile phone while charging the battery.
The internal clock for time, date (see page
36)and alarms (see page 47) will still keep on running for about one hour if neither the battery nor the charger is connected, but no alarm will sound unless a charged battery is connected.
