started
Setting baud rate for data transmission (7-8)
a call Phone number lists Getting
You can connect your mobile phone to a PC to use it as a modem for data and fax services. The PC connection also supports the downloading of GPS information from the mobile phone to the PC. To connect the mo- bile phone to a PC you need a data cable compatible with the mobile phone.
Usually the mobile phone discovers the accu- rate baud rate setting for data transmission to a PC automatically (setting Automatic). But some devices do not work with the auto- matic baud rate setting. In this case you have to set the baud rate manually.
The baud rate setting affects the connection speed between the mobile phone and the PC only. The connection speed in the GSM and satellite network is limited to 9600 baud.
The following baud rates can be set:
–Automatic (=standard setting of the con- nected device is recognised; max. 19200 baud)
–300 Baud, 1200 Baud, 2400 Baud,
4800 Baud, 9600 Baud,19200 Baud
Note:
The GPS NMEA protocol always uses 4800 Baud (you can not change this).
To set the baud rate with external devices:
Select Menu > Settings > Data Link Rate
The current setting is displayed
Press Change
Scroll to the desired baud rate
Press Select
During
Diversion
Any key answer (7-3-1)
This function enables answering a call by pressing any key (except fand the volume key).
This function can be switched off or on:
Select Menu > Settings > Call >Any Key Answer
The current setting is displayed
Press Change
Press Save
Security settings SMS/Broadcast
Send DTMF tone (7-3-2)
This function enables sending DTMF (Dual Tone Multi Frequency) tones during a call to a service which accepts only DTMF tones, e.g. in order to enter access codes for listen- ing to an answering machine. If you have switched this feature on, a DTMF tone is sent with each key press during a call.
This function can be switched on or off:
Select Menu > Settings > Call >DTMF Tone
The current setting is displayed
Press Change
Press Save
38
