Manuals / Fujitsu / Computer Equipment / Network Router

Fujitsu 4Gbit/s FC I/O Modules manual 5 4Gbit/s FC I/O Module Details Setting

Models: 4Gbit/s FC I/O Modules

1 40

Download 40 pages 22.57 Kb

Page 24

5 4Gbit/s FC I/O Module Details Setting

5 4Gbit/s FC I/O Module Details Setting

This chapter explains the 4Gbit/s FC I/O Module details settings.

When performing this product details settings, log on with administrative privileges.

When the connected device to this product is ETERNUS SX300, refer to the User’s Guide, etc. for ETERNUS SX300.

The setting effects are the same between the settings set by double-clicking [Device] of [key] after selecting [Registry] with the radio button in the LightPulse Utility/NT settings, and the settings set by the Global setting (checking [Global]) for all boards as described in this document.

For PG-FCD201, Adapter 0 and 1 are displayed.

62

Image 24

Fujitsu 4Gbit/s FC I/O Modules manual 5 4Gbit/s FC I/O Module Details Setting

Contents

Before Reading This Manual Symbols Entering Commands KeysRemarks Warning DescriptionsSafety AbbreviationsHandling this product Checking the Items Supplied Contents Page 1 4Gbit/s FC I/O Module 1.1 Overview1.2 Specifications 1.3 How to Check the Driver Version 1.6 Points to Note When Using This Driver 1.4 4Gbit/s FC I/O Module to ETERNUS Connections1.5 Notes on Replacing the 4Gbit/s FC I/O Module Fabric connection2 Installing the 4Gbit/s FC I/O Module 2.1 Installing in a Server Blade2.1.1 Installation Position of the 4Gbit/s FC I/O Module 2.1.2 Installation Procedure for the 4Gbit/s FC I/O Module5 Install the 4Gbit/s FC I/O Module 8 Install the server blade in the chassis6 Secure the 4Gbit/s FC I/O Module with the screws 7 Attach the top cover3 Connecting Cables This chapter explains points to note when connecting cables4 Installing Drivers and Utilities 4.1 Automatic Installation7 Click Finish 4.2 Manual Installation 4.2.1 For Installation on Windows ServerInstalling Emulex PLUS Installing *****port Miniport Driver 4.2.2 Installing HBAnyware 4.3 Checking and Updating Firmware / BootBIOS 4.3.1 Using LightPulse Utility / NT8 Click the Download button 4.3.2 Using HBAnyware Utility 4.4 Uninstalling HBAnyware 4.5 Uninstalling AutoPilot Installer5 4Gbit/s FC I/O Module Details Setting This chapter explains the 4Gbit/s FC I/O Module details settings5.1 4Gbit/s FC I/O Module Setting 5.1.1 Using LightPulse Utility / NT6 Double-click QueueDepth in Parameters 7 Set a value in New Value, check Permanent, and click Change 8 Double-click QueueTarget in Parameters 9 Set 1 fixed value in New Value, check Permanent, and click Change10 Double-click LinkSpeed in Parameter 11 Set a value in New Value, check Permanent, and click Change5 4Gbit/s FC I/O Module Details Setting 5.1.2 Using HBAnyware Utility 2 Select the local server, and click the Driver Parameters tab3 Click Topology in Adapter Parameter 5 Click QueueDepth in Adapter Parameters6 Set a value in Value in Modify Adapter Parameter, and click Apply 7 Double-click QueueTarget in Adapter Parameters 5.2 Registry Setting 6 Troubleshooting How to start the Light Pulse BIOS Utility6.1 Checking the Link Status 6.2 Troubleshooting Check the settings according to the User’sThis product is not If the message is not displayed, turn off theAppendix A How to Identify the Adapter In the following diagram the IEEE Address is 0000C93CC778IEEE ADDRESS 0000C93CC778 Appendix B Contact Information Singapore Issued on Issued by発行日発行責任