Fujitsu 4Gbit/s FC I/O Modules manual Manual Installation, For Installation on Windows Server

4.2Manual Installation

Drivers and utilities can be manually installed using the following procedures.

4.2.1For Installation on Windows Server 2003

￿When "Welcome to the Found New Hardware Wizard" appears during startup, click [Cancel].

Installing Emulex PLUS

1Click the "Start" button → "Control Panel" → "Add Hardware" in this order.

2Click [Next].

3Check "Yes, I have already connected the hardware", and click [Next].

4From "Installed hardware", select "Add a new hardware device", and click [Next].

5Check "Install the hardware that I manually select from a list", and click [Next].

6From "Common hardware types", select "Show All Devices", and click [Next].

7Click [Have Disk].

8Insert the driver disk (CD-ROM) into the CD-ROM drive.

9Specify the following folder in the CD-ROM drive for "File copy source of the manufacturer", and click [OK].

•For 32Bit

[CD-ROM drive]: \v1.30a9\AutoPilot Installer\Drivers\Sporport\x86

• For 64Bit

[CD-ROM drive]: \v1.30a9\AutoPilot Installer\Drivers\Sporport\x64

10Select "Emulex PLUS", and click [Next].

11Click [Next].

12Click [Finish].

E

4 Installing Drivers and Utilities 55