Fujitsu 4Gbit/s FC I/O Modules manual Click the Download button

7For the BootBIOS version, check the "Revision" value in "Boot Bios Firmware".

•When the version is "1.70a3", proceed to Step 11.

•When the version is other than "1.70a3", proceed to Step 8.

8Click the [Download] button.

Although the warning window appears, click [OK].

9Insert the driver disk (CD-ROM) into the CD-ROM drive, select the BootBIOS file in the CD-ROM drive, and click [Open].

[CD-ROM drive]:\FirmBIOS\ZB170A3.PRG BootBIOS update starts.

10Check that the "Revision" value in "Boot Bios Firmware" became "1.70a3".

For PG-FCD201, perform procedures as above to all adapter.

11After checking versions of all adapters, restart the server blade to enable the settings, and proceed to "5 4Gbit/s FC I/O Module Details Setting" (￿pg.62).

￿When replacing this product, perform "4.3 Checking and Updating Firmware / BootBIOS" (￿pg.58) again as necessary.

E

4 Installing Drivers and Utilities 59