Fujitsu 4Gbit/s FC I/O Modules manual Check the driver version, Close the board property window

12Check the driver version.

•For 32Bit 5.1.30.9

•For 64Bit 7.1.30.9

13Close the board property window.

When installation finishes, perform "4.2.2 Installing HBAnyware" (￿pg.57).

4.2.2Installing HBAnyware

1Insert the driver disk (CD-ROM) into the CD-ROM drive, and execute "setupapps.exe" in the driver disk.

[CD-ROM drive]: \v1.30a9\AutoPilot Installer\Utilities\setupapps.exe

2Click [Next].

3Select "Full Management", check "Allow users to change management mode from utility.", and click [OK].

4Click [Finish].

When installation finishes, proceed to "4.3 Checking and Updating Firmware /BootBIOS" (￿pg.58). For details about the uninstallation procedure, refer to "4.4 Uninstalling HBAnyware" (￿pg.61).

E

4 Installing Drivers and Utilities 57