Manuals
/
Fujitsu
/
Computer Equipment
/
Network Router
Fujitsu
4Gbit/s FC I/O Modules manual
Models:
4Gbit/s FC I/O Modules
1
6
40
40
Download
40 pages
22.57 Kb
3
4
5
6
7
8
9
10
<
>
Troubleshooting
Specification
Install
In the following diagram the IEEE Address is 0000C93CC778
Connecting Cables
Issued on
Entering Commands Keys
5 4Gbit/s FC I/O Module Details Setting
How to
Safety
Page 6
Image 6
44
Page 5
Page 7
Page 6
Image 6
Page 5
Page 7
Contents
Before Reading This Manual
Remarks
Symbols
Entering Commands Keys
Warning Descriptions
Safety
Abbreviations
Handling this product
Checking the Items Supplied
Contents
Page
1 4Gbit/s FC I/O Module
1.1 Overview
1.2 Specifications
1.3 How to Check the Driver Version
1.5 Notes on Replacing the 4Gbit/s FC I/O Module
1.6 Points to Note When Using This Driver
1.4 4Gbit/s FC I/O Module to ETERNUS Connections
Fabric connection
2 Installing the 4Gbit/s FC I/O Module
2.1 Installing in a Server Blade
2.1.1 Installation Position of the 4Gbit/s FC I/O Module
2.1.2 Installation Procedure for the 4Gbit/s FC I/O Module
6 Secure the 4Gbit/s FC I/O Module with the screws
5 Install the 4Gbit/s FC I/O Module
8 Install the server blade in the chassis
7 Attach the top cover
3 Connecting Cables
This chapter explains points to note when connecting cables
4 Installing Drivers and Utilities
4.1 Automatic Installation
7 Click Finish
4.2 Manual Installation
4.2.1 For Installation on Windows Server
Installing Emulex PLUS
Installing *****port Miniport Driver
4.2.2 Installing HBAnyware
4.3 Checking and Updating Firmware / BootBIOS
4.3.1 Using LightPulse Utility / NT
8 Click the Download button
4.3.2 Using HBAnyware Utility
4.4 Uninstalling HBAnyware
4.5 Uninstalling AutoPilot Installer
5 4Gbit/s FC I/O Module Details Setting
This chapter explains the 4Gbit/s FC I/O Module details settings
5.1 4Gbit/s FC I/O Module Setting
5.1.1 Using LightPulse Utility / NT
6 Double-click QueueDepth in Parameters
7 Set a value in New Value, check Permanent, and click Change
10 Double-click LinkSpeed in Parameter
8 Double-click QueueTarget in Parameters
9 Set 1 fixed value in New Value, check Permanent, and click Change
11 Set a value in New Value, check Permanent, and click Change
5 4Gbit/s FC I/O Module Details Setting
5.1.2 Using HBAnyware Utility
2 Select the local server, and click the Driver Parameters tab
3 Click Topology in Adapter Parameter
5 Click QueueDepth in Adapter Parameters
6 Set a value in Value in Modify Adapter Parameter, and click Apply
7 Double-click QueueTarget in Adapter Parameters
5.2 Registry Setting
6 Troubleshooting
How to start the Light Pulse BIOS Utility
6.1 Checking the Link Status
This product is not
6.2 Troubleshooting
Check the settings according to the User’s
If the message is not displayed, turn off the
Appendix A How to Identify the Adapter
In the following diagram the IEEE Address is 0000C93CC778
IEEE ADDRESS 0000C93CC778
Appendix B Contact Information
Singapore
発 行 日
Issued on
Issued by
発行責任