Fujitsu 4Gbit/s FC I/O Modules manual Double-click QueueDepth in Parameters

4Select the adapter for which settings are changed from the adapter list on the left of the window, and double-click "Topology" in "Parameters".

When there are two or more adapters, refer to "Appendix A How to Identify the Adapter" (￿pg.74).

5Set a value for "New Value" depending on the connection type, check "Permanent", and click [Change].

When the connection type varies for each adapter, remove the check from the "Global" checkbox.

Connection type	New Value
FC-AL	0
Fabric	1

• When all the installed adapters are FC-AL connection:

• When only the adapter under setting is Fabric connection:

6Double-click "QueueDepth" in "Parameters".

64