Manuals / Fujitsu / Computer Equipment / Network Router

Fujitsu 4Gbit/s FC I/O Modules manual Checking the Items Supplied

Models: 4Gbit/s FC I/O Modules

1 40

Download 40 pages 22.57 Kb

Page 4

Checking the Items Supplied

Checking the Items Supplied

Check that the following items are supplied before using this product.

Please contact an office listed in "Appendix B Contact Information" (pg.75) if any parts are missing.

•4Gbit/s FC I/O Module (this product)

•Driver Disk ⋅ 1 (CD-ROM)

-4Gbit/s FC I/O Module (PG-FCD201) Drivers CD

•User's Guide (this document)

•Screw (3 screws)

Microsoft, Windows, Windows Server are registered trademarks or trademarks of the Microsoft Corporation in the USA and other countries.

Other product names used are trademarks or registered trademarks of their respective manufacturers. Other products are copyrights of their respective manufacturers.

All Rights Reserved, Copyright© FUJITSU LIMITED 2007

42

Image 4

Fujitsu 4Gbit/s FC I/O Modules manual Checking the Items Supplied

Contents

Before Reading This Manual Symbols Entering Commands KeysRemarks Warning DescriptionsAbbreviations SafetyHandling this product Checking the Items Supplied Contents Page 1 4Gbit/s FC I/O Module 1.1 Overview1.2 Specifications 1.3 How to Check the Driver Version 1.6 Points to Note When Using This Driver 1.4 4Gbit/s FC I/O Module to ETERNUS Connections1.5 Notes on Replacing the 4Gbit/s FC I/O Module Fabric connection2 Installing the 4Gbit/s FC I/O Module 2.1 Installing in a Server Blade2.1.1 Installation Position of the 4Gbit/s FC I/O Module 2.1.2 Installation Procedure for the 4Gbit/s FC I/O Module5 Install the 4Gbit/s FC I/O Module 8 Install the server blade in the chassis6 Secure the 4Gbit/s FC I/O Module with the screws 7 Attach the top cover3 Connecting Cables This chapter explains points to note when connecting cables4 Installing Drivers and Utilities 4.1 Automatic Installation7 Click Finish 4.2.1 For Installation on Windows Server 4.2 Manual InstallationInstalling Emulex PLUS Installing *****port Miniport Driver 4.2.2 Installing HBAnyware 4.3 Checking and Updating Firmware / BootBIOS 4.3.1 Using LightPulse Utility / NT8 Click the Download button 4.3.2 Using HBAnyware Utility 4.4 Uninstalling HBAnyware 4.5 Uninstalling AutoPilot Installer5 4Gbit/s FC I/O Module Details Setting This chapter explains the 4Gbit/s FC I/O Module details settings5.1 4Gbit/s FC I/O Module Setting 5.1.1 Using LightPulse Utility / NT6 Double-click QueueDepth in Parameters 7 Set a value in New Value, check Permanent, and click Change 8 Double-click QueueTarget in Parameters 9 Set 1 fixed value in New Value, check Permanent, and click Change10 Double-click LinkSpeed in Parameter 11 Set a value in New Value, check Permanent, and click Change5 4Gbit/s FC I/O Module Details Setting 5.1.2 Using HBAnyware Utility 2 Select the local server, and click the Driver Parameters tab5 Click QueueDepth in Adapter Parameters 3 Click Topology in Adapter Parameter6 Set a value in Value in Modify Adapter Parameter, and click Apply 7 Double-click QueueTarget in Adapter Parameters 5.2 Registry Setting How to start the Light Pulse BIOS Utility 6 Troubleshooting6.1 Checking the Link Status 6.2 Troubleshooting Check the settings according to the User’sThis product is not If the message is not displayed, turn off theIn the following diagram the IEEE Address is 0000C93CC778 Appendix A How to Identify the AdapterIEEE ADDRESS 0000C93CC778 Appendix B Contact Information Singapore Issued on Issued by発行日発行責任