Fujitsu 4Gbit/s FC I/O Modules manual 1.4 4Gbit/s FC I/O Module to ETERNUS Connections, Event log

1.44Gbit/s FC I/O Module to ETERNUS Connections

This section explains the connection of the 4Gbit/s FC I/O Module and ETERNUS.

Fabric connection

Connect to the ETERNUS via FC Switch Blade.

BX600 S3 chassis
	PRIMERGY BX620 S3/BX620 S4		FC Switch Blade (PG-FCS103)
		PG-FCD201
			FC Switch Blade (PG-FCS103)

ETERNUS3000/

ETERNUS6000

1.5Notes on Replacing the 4Gbit/s FC I/O Module

When an operating 4Gbit/s FC I/O Module has been replaced with a new 4Gbit/s FC I/O Module, it may be necessary to change the storage and FC Switch Blade settings because the WWN of the 4Gbit/s FC I/O Module will change.

1.6Points to Note When Using This Driver

Event log

When the system is started using this driver, the following logs are stored in the event viewer system log. They can be ignored.

5QWTEGGNZRNWU 'XGPV+& 6[RG+PHQTOCVKQP &GUETKRVKQP

6JGFGUETKRVKQPHQT'XGPV+&=?KP5QWTEG=GNZRNWU?ECPPQVDGHQWPF 6JGNQECNEQORWVGTOC[PQVJCXGVJGPGEGUUCT[TGIKUVT[KPHQTOCVKQPQT OGUUCIG&..HKNGUVQFKURNC[OGUUCIGUHTQOCTGOQVGEQORWVGT;QWOC[ DGCDNGVQWUGVJG#7:5174%'HNCIVQTGVTKXGVJKUFGUETKRVKQPUGG *GNRCPF5WRRQTVHQTFGVCKNU6JGHQNNQYKPIKPHQTOCVKQPKURCTVQHVJGGXGPV 

48