Manuals / Fujitsu / Computer Equipment / Network Router

Fujitsu 4Gbit/s FC I/O Modules 5.1 4Gbit/s FC I/O Module Setting, Using LightPulse Utility / NT

Models: 4Gbit/s FC I/O Modules

1 40

Download 40 pages 22.57 Kb

Page 25

5.14Gbit/s FC I/O Module Setting

5.14Gbit/s FC I/O Module Setting

There are two methods for this product setting. The results will bring no difference. "5.1.1 Using LightPulse Utility / NT"(pg.63)

"5.1.2 Using HBAnyware Utility"(pg.68)

5.1.1Using LightPulse Utility / NT

This product name displayed in LightPulse Utility/NT is "Adapter * -BX600FC42E -* Port *".

To identify the 4Gbit/s FC I/O Module from LightPulse Utility/NT in an environment where multiple 4Gbit/s FC I/O Module are installed, refer to "Appendix A How to Identify the Adapter" (pg.74).

1Click the "Start" button → "Programs" or "All Programs" → "Emulex" → "lpUtilNT" in this order.

When adding this product after installation, the settings for the existing product may be changed. Therefore, after adding this product or driver, check the detailed settings and correct them if necessary.

2Select "Driver Parameters" in the "Category" field.

3Select "Parameters".

The following parameter data are displayed.

For PG-FCD201, Adapter 0 and 1are displayed.	E

5 4Gbit/s FC I/O Module Details Setting 63

Image 25

Fujitsu 4Gbit/s FC I/O Modules manual 5.1 4Gbit/s FC I/O Module Setting, Using LightPulse Utility / NT

Contents

Before Reading This Manual Entering Commands Keys SymbolsRemarks Warning DescriptionsAbbreviations SafetyHandling this product Checking the Items Supplied Contents Page 1.1 Overview 1 4Gbit/s FC I/O Module1.2 Specifications 1.3 How to Check the Driver Version 1.4 4Gbit/s FC I/O Module to ETERNUS Connections 1.6 Points to Note When Using This Driver1.5 Notes on Replacing the 4Gbit/s FC I/O Module Fabric connection2.1 Installing in a Server Blade 2 Installing the 4Gbit/s FC I/O Module2.1.2 Installation Procedure for the 4Gbit/s FC I/O Module 2.1.1 Installation Position of the 4Gbit/s FC I/O Module8 Install the server blade in the chassis 5 Install the 4Gbit/s FC I/O Module6 Secure the 4Gbit/s FC I/O Module with the screws 7 Attach the top coverThis chapter explains points to note when connecting cables 3 Connecting Cables4.1 Automatic Installation 4 Installing Drivers and Utilities7 Click Finish 4.2.1 For Installation on Windows Server 4.2 Manual InstallationInstalling Emulex PLUS Installing *****port Miniport Driver 4.2.2 Installing HBAnyware 4.3.1 Using LightPulse Utility / NT 4.3 Checking and Updating Firmware / BootBIOS8 Click the Download button 4.3.2 Using HBAnyware Utility 4.5 Uninstalling AutoPilot Installer 4.4 Uninstalling HBAnywareThis chapter explains the 4Gbit/s FC I/O Module details settings 5 4Gbit/s FC I/O Module Details Setting5.1.1 Using LightPulse Utility / NT 5.1 4Gbit/s FC I/O Module Setting6 Double-click QueueDepth in Parameters 7 Set a value in New Value, check Permanent, and click Change 9 Set 1 fixed value in New Value, check Permanent, and click Change 8 Double-click QueueTarget in Parameters10 Double-click LinkSpeed in Parameter 11 Set a value in New Value, check Permanent, and click Change5 4Gbit/s FC I/O Module Details Setting 2 Select the local server, and click the Driver Parameters tab 5.1.2 Using HBAnyware Utility5 Click QueueDepth in Adapter Parameters 3 Click Topology in Adapter Parameter6 Set a value in Value in Modify Adapter Parameter, and click Apply 7 Double-click QueueTarget in Adapter Parameters 5.2 Registry Setting How to start the Light Pulse BIOS Utility 6 Troubleshooting6.1 Checking the Link Status Check the settings according to the User’s 6.2 TroubleshootingThis product is not If the message is not displayed, turn off theIn the following diagram the IEEE Address is 0000C93CC778 Appendix A How to Identify the AdapterIEEE ADDRESS 0000C93CC778 Appendix B Contact Information Singapore Issued by Issued on発行日発行責任