Iomega Network Device Setting a User Password, To remove a user account, To set the User Password

accounts that you have created on the DataSafe NAS. (If you remove the only user account on the DataSafe NAS, security is disabled.)

WARNING:	The system generates an Internet
	Guest Account and a Launch IIS
	Process Account (IUSR_servername
	and IWAM_servername). Do not delete
	these built-in users or you will not be
	able to administer the DataSafe NAS.
	Deleted users cannot be recovered.

If you delete a user account and then create another user account with the same user name, you must set new permissions for the new user; the new user will not inherit the permissions that were granted to the old user.

To remove a user account

1.On the primary menu bar, select Users and

Groups.

2.Select Users. (See Figure 37 on page 95.)

3.In the Object Selection table, select the user account you wish to remove.

4.In the Tasks list, click Delete.

5.In the Delete User dialog, verify that the user identified matches the user account you wish to delete, then click OK to delete the account.

Related Topics

n“Initial DataSafe NAS Configuration” on page 13

Setting a User Password

To set the User Password

1.From the primary menu bar, select Users and

Groups.

DataSafe NAS User’s Manual 97