Enable Services

Microsoft recommends that you enable only the necessary network components. Limiting the number of enabled network components will enhance the performance of other network services. Additionally, if

aproblem is encountered with a network or dial-up connection, the system will attempt to establish connectivity by using every network protocol that is installed and enabled. By only enabling the services that your system can use, the DataSafe NAS can conserve resources and perform better.

To enable a network service

1.On the primary menu bar, click Services.

The Manage Services page (Figure 19) displays.

Figure 19 Manage Services

2.On the Object Selection table, select the service to enable.

3.On the Tasks list (adjacent to the Object Selection table), click Enable.

DataSafe NAS User’s Manual

60

Page 65
Image 65
Iomega Network Device manual Enable Services, To enable a network service