Iomega Network Device manual To remove an NFS client, Remove, FTP Share Properties

8.Use the Type of access drop-down list to indicate the degree of control the specified client can exercise over files in the share.

9.Click OK.

To remove an NFS client

1.On the primary menu bar, select Folders and

Shares.

2.On the secondary menu bar, select Windows and UNIX Shares.

3.From the Object Selection table (Figure 51 on page 118), select the share for which you want to add an NFS client or client group.

4.In the Tasks list, click Properties….

5.On the General tab (Figure 51 on page 118), enter the Share name, and Share path. Under the

Accessible from the following clients: prompt, check the Unix (NFS) box.

6.Select the NFS tab.

7.Select the desired client appliance or client group from the list box in the center, then click

Remove.

8.Click OK.

Related Topics

n“NFS Service” on page 62

FTP Share Properties

Use this page to specify which FTP clients are granted access to each share. Access can be granted or denied on the basis of client host name.

To allow clients permission to an FTP share

1.On the primary menu bar, select Folders and

Shares.

DataSafe NAS User’s Manual 122