an e-mail address as the password. By default, anonymous connections are not allowed.

Note: You cannot access the FTP server from a Microsoft Windows Powered user account with the name anonymous. The anonymous user name is reserved in the FTP server for the anonymous logon function. Users logging on to the server with the user name anonymous receive permissions based on the FTP server configuration for anonymous logons.

After the FTP server service software is installed on your computer, you must configure the software to operate.

To configure FTP anonymous access

1.On the primary menu bar, select Services.

2.On the secondary menu bar, select FTP. —OR—

Select the FTP Service option from the Object Selection table, then click Properties.

The FTP Service Properties dialog box (Figure 29 on page 79) opens.

3.Select the Anonymous Access tab (Figure 31).

Figure 30 Anonymous Access tab of FTP Service Properties

4.Choose settings according to the following considerations then click OK:

DataSafe NAS User’s Manual

80

Page 85
Image 85
Iomega Network Device manual To configure FTP anonymous access, Anonymous Access tab of FTP Service Properties