Iomega Network Device manual Manage Services, Chapter Sections

4 Manage Services

The service management page allows you to enable and start, disable and stop, or configure relevant network services. The Manage Services page displays the Object Selection table. The Object Selection table has the following parts:

nName — This column lists each service by name. To enable, disable, or change the properties of a given service, click the radio button next to the service you want to modify.

nStatus — This column indicates that the service is Running, or is Paused. The column remains blank if the service is not stopped.

nStartup Type — This column indicates whether the service should: 1) start automatically when the DataSafe NAS boots, 2) be invoked manually, or 3) be disabled.

nDescription — This column displays a brief description of the service.

The Tasks list is located next to the Object Selection table. Use the Object Selection table to select a service. To perform a task, click the appropriate task from the Tasks list.

Chapter Sections

This chapter contains the following Sections:

n“Enable Services” on page 61

n“Disable Services” on page 61

n“Configure Service Properties” on page 61

DataSafe NAS User’s Manual 59