Safety Requirement

Replace battery with model CR2032 only. Use of another battery may present a risk of fire or explosion. A model CR2032 battery can be purchased at your local retail electronics supply source.

WARNING:

Battery may explode if mistreated. Do

 

not recharge, disassemble or dispose

 

of in fire.

Familiarizing Yourself with Your DataSafe

NAS

Front Panel

The DataSafe NAS front panel has four LEDs. Three are grouped together on the right side, one on the left. The LEDs indicate the following:

nFar left LED (soft power switch). Solid LED indicates power on. This LED will blink during boot-up, and will also blink to indicate error conditions (See Chapter 7 - Maintenance for alert codes).

nNetwork Link 1 for LAN 1. Flashing indicates network activity.

nNetwork Link 2 for LAN 2. Flashing indicates network activity.

nHard disk drive LED indicates read/write activity.

4

Page 10
Image 10
Iomega Network Device manual Safety Requirement, Familiarizing Yourself with Your DataSafe, Front Panel