Iomega Network Device manual To change the Wins settings of the DataSafe

you statically assign the IP address for the adapter. If you have DHCP enabled, you can remove one or two existing addresses and add different addresses, but you will not be able to remove all WINS servers from a DHCP-enabled adapter. If you remove two WINS addresses and do not add at least one, DHCP will automatically assign WINS addresses.

To change the WINS settings of the DataSafe

NAS

1.On the primary menu bar, click Network Setup.

2.On the Network Setup page, click Interfaces.

3.On the Object Selection table, select the network connection to modify.

4.On the Tasks list, select WINS.

The WINS Configuration page (Figure 9) displays.

Figure 9 WINS Configuration

5.In the text box next to the Add button, type the IP address of the WINS server, then click Add.

6.Repeat steps 4 and 5 for each WINS server IP address you want to add.

7.Click OK.

DataSafe NAS User’s Manual 33