After a system failure, when the DataSafe NAS is restarted the DataSafe NAS attempts to restore the file lock status to the previous condition. If the client fails, the DataSafe NAS releases the file lock. However, after the client restarts it has a short period of time to reclaim the file lock.

To manage NFS locks

1.On the primary menu bar, select Services.

2.In the Object Selection table of the Manage Services screen, select NFS Service, then select Properties in the Task column.

3.On the NFS Service page, click Locks. The NFS Locks page (Figure 24) displays.

Figure 24 NFS Locks

4.On the NFS Locks page, from the Current locks list box, select the client for which you want to release the NFS locks.

5.In the Wait period text box, enter the number of seconds after restarting that the DataSafe NAS waits to re-establish a file lock with a client.

6.Click OK.

DataSafe NAS User’s Manual

68

Page 73
Image 73
Iomega Network Device manual To manage NFS locks, NFS Locks