Iomega Network Device manual Change Administrator Password, Current password box

Change Administrator Password

The DataSafe NAS comes with a set of default accounts. Only the Administrator account has administrative privileges. The default User Name is: Admnistrator, and the Password is blank (none).

Note: If an administrator adds a domain account to the local Administrators group, the domain user may access and administer the DataSafe NAS. However, the administrator cannot use the Change Administrator Password page to change his or her (domain account) password. This page can only be used to change the local administrator's account password.

WARNING:	If you change the user name and
	password, be certain that you keep a
	record of the changes. If you forget
	and cannot locate the new user name
	or password, neither you nor Iomega
	Technical Support will be able to
	administer your DataSafe NAS.

To change the Administrator password for the DataSafe NAS

1.On the primary menu bar, click Network Setup.

2.On the Network Setup page, click Change

Administrator Password.

3.Enter the current administrator password in the

Current password box.

4.Enter the new administrator password in the New password box.

DataSafe NAS User’s Manual 41