3.From the Object Selection table (Figure 49 on page 115), select the share for which you want to add an FTP client.

4.Select the FTP tab.

5.Check the Log visits check box.

6.Click OK.

Related Topics

n“Logs” on page 136

HTTP Share Properties

Use this page to specify which HTTP clients are granted access to each share. Access can be granted or denied on the basis of client host name. Access can also be granted or denied on the basis of client groups, where a client group contains one or more client host names.

To allow clients permission to an HTTP share

1.On the primary menu bar, select Folders and

Shares.

2.On the secondary menu bar, select Shares.

3.From the Object Selection table (Figure 49 on page 115), select the share for which you want to add an HTTP client.

4.Select the HTTP tab.

5.On the HTTP tab

nCheck the Read check box to allow read access.

nCheck the Write check box to allow write access.

You may choose to allow read-only, write-only, or read/write permissions.

6. Click OK.

DataSafe NAS User’s Manual

124

Page 129
Image 129
Iomega Network Device manual To allow clients permission to an Http share, Http Share Properties