DataSafe NAS User’s Manual 16
2 Network Setup
From the Network Setup page, you can choose
which network-related properties of the DataSafe NAS
to configure:
nIdentification—Set the name and domain
membership of the DataSafe NAS. (See
“Identification” on page 17.)
nInterfaces—Configure the local network settings
on the DataSafe NAS. (See “Interfaces: Network
Settings” on page 26.)
nGlobal Settings—Configure network settings
that apply to all network adapters on the DataSafe
NAS. (See “Global Settings: Network
Configuration” on page 34.)
nChange Administrator Password—Change
your password, or change the password of a user
who is also a member of the Administrators group
account. (See “Change Administrator Password”
on page 41.)
Note: The second component of this task applies to
the user currently accessing the DataSafe
NAS, not to members of the “Administrator”
account.
nSNMP Service Configuration—Configure the
properties of the SNMP service on the DataSafe
NAS. This topic is covered in the Manage Services
chapter. (See “SNMP Service Configuration” on
page 90.)
nNIC Configuration—Configure the properties
of the NIC on the DataSafe NAS. (See “NIC
Configuration” on page 43.)