Iomega Network Device manual LED Alerts

4.Click the checkbox next to each alert level for which you want email messages sent.

5.In the To: field, specify the email address of the person who should respond to the alert (administrator). Address should be entered in the form administratorname@domainname.com.

6.Leave the With field blank if email should be sent directly to the specified address. If email should be sent through an SMTP gateway, enter the name or IP address.

7.Click the Test button to send a sample email message to the administrator, specifying the server name and confirming correct configuration of Alert Email.

Alert messages to administrators contain a link to the URL of the error message.

LED Alerts

During boot-up and power-down the soft power LED blinks and beeps. During operation, the LED can have one of four possible states: steady off, steady on, fast blinking and slow blinking. In the fast blinking state, the flashing period is 300msec with 50% duty cycle. In the slow blinking state, the flashing period is 600msec with 50% duty cycle. The count is equivalent to the LED being off the full number of cycles indicated. To indicate the blinking is beginning, there is a short pause when the LED is off. The length is half the flashing period. To see the message for different descriptions with the same LED blink code, see web UI. Click the “Status” indicator at top to get a list of messages. Click a specific message to see details.

DataSafe NAS User’s Manual 149