Panasonic DX-600 appendix Setting the Internet Parameters, Parameter Comments

Setting the Internet Parameters

Setting the User Parameters for the LAN Interface

Depending on how your machine will be configured to communicate on the LAN, the appropriate parameters listed in the table below must be stored first. (See pages 16 to 20)

	Parameter	Comments
1	DATE & TIME	Current Date and Time.
2	TIME ZONE	The Time Zone is required as part of the Email header information when sending
		Internet faxes.
3	LOGO	Up to 25 characters & digits.
4	CHARACTER ID	Up to 16 characters & digits.
5	ID NO.	Your Fax Telephone Number. (Up to 20 digits)
6	(MAC ADDRESS)	Hardware Address hard-coded into your machine. (If required, can be obtained from the
		Fax Parameter List printout, by pressing [FUNCTION] [6] [4] [SET])
7	IP ADDRESS	IP Address assigned to your machine by the Network Administrator or the DHCP Server.
8	SUBNET MASK	Subnet Mask assigned by the Network Administrator or the DHCP Server.
9	DEFAULT GATEWAY IP	Default Gateway IP Address assigned by the Network Administrator or the DHCP
	ADDR	Server.
10	PRIMARY DNS SERVER	IP Address of the primary DNS Server. If the DNS Server is not available, change the
	IP ADDRESS	setting of the Fax Parameter No. 161 (DNS SERVER) to "Invalid", then enter the IP
		Address instead.
11	SECONDARY DNS	IP Address of the secondary DNS Server.
	SERVER IP ADDRESS
12	EMAIL ADDRESS	The Email Address assigned to your machine for sending and receiving. (Up to 60
		characters)
13	SMTP SERVER NAME	The name of the SMTP Mail Server. (Up to 60 characters)
14	SMTP SERVER IP ADDR	IP Address of the SMTP Mail Server.
15	SMTP AUTH NAME	User name required to login to the SMTP Server before it allow to send email messages.
		(Up to 40 characters).
16	SMTP PASSWORD	Password assigned to your machine. (Up to 10 characters)
17	POP SERVER NAME	The name of the POP Mail Server. (Up to 60 characters).
18	POP SERVER IP ADDR	IP Address of the POP Mail Server.
19	POP USER NAME	User Name assigned to your machine. (Up to 40 characters)
20	POP PASSWORD	Password assigned to your machine. (Up to 10 characters)
21	LDAP SERVER NAME	The name of the LDAP Server. (Up to 60 characters) (Available for some countries only.)
22	LDAP LOG IN NAME	Login Name assigned to your machine. (Up to 40 characters) (Available for some
		countries only.)
23	LDAP PASSWORD	Password assigned to your machine. (Up to 10 characters) (Available for some
		countries only.)
24	LDAP SEARCH BASE	ID for starting the search in the directory on the LDAP server. (Up to 60 Characters)
		(Available for some countries only.)
25	HOST NAME	The Host Name assigned to your machine. (Up to 60 characters)
26	DEFAULT SUBJECT	The default information to be added to the Subject Line for all outgoing Email (up to 40
		characters). To manually input this information before transmission, change the Fax
		Parameter No. 159 (SUBJECT LINE ENTRY) to "2:Valid".
27	DEFAULT DOMAIN	When the outgoing email address is incomplete by SMTP standards, the Frequently
		Sent Domain specified here will be automatically added to the email address. This
		feature is also useful as a shortcut when manually entering email addresses to a
		frequently used Domain. (Up to 50 characters)
28	SELECTABLE DOMAINS	Enter up to 10 Domain Names that can be selected after the Domain "@" key is pressed
	(01) ~ (10)	using the "\/ or /\" key during Manual email addressing. (Up to 30 characters)
29	REMOTE PASSWORD	This is a security password that allows Remote Programming of the Internet Parameters
		and Auto Dialler or the retrieval of the Journal via an Email. (Up to 10 characters)
30	RELAY XMT PASSWORD	A password that provides Network security for your Relay Station (used exclusively for
		G3 relay purposes). (Up to 10 characters)
31	MANAGER’S EMAIL	Department Manager’s Email Address for notification of all Internet relayed
	ADDR	transmissions for supervision and cost control purposes. (Up to 60 characters)
32	RELAY DOMAIN	Enter up to 10 Domain Name(s) that have been authorized to access your Internet Fax
	(01) ~ (10)	for Relayed XMT Request. (Up to 30 characters)
		Relay Domain, a.k.a. Domain Name in your machine.
33	COMMUNITY NAME	Community Name used for the Network Device Locator.
	(01) ~ (02)
34	DEVICE NAME	Device Name used for the Network Device Locator.
35	DEVICE LOCATION	Device Location for the Network Device Locator.

50