Panasonic DX-600 appendix Setting the Internet Parameters, Setting the User Internet Parameters

Setting the Internet Parameters

Setting the User (Internet) Parameters

Before starting, you will need a completed copy of page 19 (Pre Installation Information). For your machine to be able to operate on the Network properly, the following five (5) Basic Parameters must be pre- programmed into the machine.

•IP Address

•Subnet Mask

•Default Gateway IP Address

•SMTP Server Name or IP Address

•Email Address

Note: If DHCP server is available on your network, the IP Address, Subnet Mask and Default Gateway IP Address will be acquired automatically.

Installing Your Machine

1	7
2	1
3
4	repeatedly until display shows;
	Enter the IP Address using the keypad. Press	or

SET MODE (1-8)

ENTER NO. OR ∨ ∧

1:USER PARAMETERS? PRESS SET TO SELECT

IP ADDRESS

❚

IP ADDRESS 123.178.240.3❚

5

to enter the period ".". (See Note 3)

Ex: 1 2 3 1 7 8 2 4 0 3

To continue setting other parameters, or press STOP to return to standby.

SUBNET MASK

❚

NOTE 1. To scroll the display to desired User Parameter in Step 3, press or .

2.If the DNS Server is not available, change the setting of the Fax Parameter No. 161 (DNS SERVER) to "Invalid", then enter the IP Address instead.

3.For convenience, you can use to enter a period "." while programming IP Addresses only.

Otherwise is used to enter an asterisk under other conditions.

49