Nortel Networks NN46120-104 manual Complete the New Setup, Select, Press Enter if correct

46Initial Setup

10Enter a Management IP address (MIP) on the management interface.

Enter the Management IP (MIP) address: <IP address>

Making sure the MIP does not exist...ok

Trying to contact gateway...ok

Finally enter a unique Management IP address (MIP) that is within the same network address range as the host IP address on the management (private) interface.

Complete the new setup by following the instructions in the next section, "Complete the New Setup".

--End--

Complete the New Setup

Step Action

1Configure the time zone and NTP and DNS server settings.

If you don’t have access to the IP address of an NTP server

at this point, you can configure this item after the initial setup is completed. See the "NTP Servers Configuration " section under Configuration menu>System Configuration in the Command Reference.

( new setup, continued)

Enter a timezone or ’select’ [select]: <Press ENTER to

select>

Select a continent or ocean: <Continent or ocean by

number>

Select a country: <Country by number>

Select a region: <Region by number, if applicable>

Selected timezone: <Suggested timezone, based on your

selections>

Enter the current date (YYYY-MM-DD) [2006-03-01]:

<Press ENTER if correct>

Enter the current time (HH:MM:SS) [09:26:16]: <Press

ENTER if correct>

Enter NTP server address (or blank to skip): <IP

address>

Enter DNS server address: <IP address>

2Generate new SSH host keys and define a password for the admin user.

Nortel VPN Gateway

User Guide

NN46120-104 02.01 Standard

14 April 2008

Copyright © 2007-2008 Nortel Networks