Image IMTL19905 user manual HOW to Move the Treadmill, Press the Stop button again and restore

	Press the Stop button again and restore the		settings, press the Save button. The console will
4
	console to the factory settings if desired.		then be restored to the factory settings.
	When the Stop button is pressed, the words		Remove the key from the console to exit the
		5
	“Restore to Factory Settings” will appear on the		information mode.
	screen. If you wish to erase all settings that users
	A, B, C, and D have saved, press the Start button.		When the key is removed, the information mode
	The words “Are You Sure?” will then appear on		will be exited.
	the screen. To confirm that you wish to erase the

HOW TO MOVE THE TREADMILL

1.Unplug the power cord.

2.Hold the treadmill with your hands in the location shown by the arrow at the right. CAUTION: To decrease the possibility of injury, bend your legs and keep your back straight. As you raise the treadmill, make sure to lift with your legs rather than your back.

3.Push the the treadmill to the desired location. To reduce the risk of injury, use extreme caution while moving the treadmill.

4.Carefully lower the treadmill until it is resting on the floor.

Wheels

29