NordicTrack NTL21905.2 user manual HOW to USE the Manual Mode, Insert the key into the console

Page 17

HOW TO USE THE MANUAL MODE

1Insert the key into the console.

See HOW TO TURN ON THE POWER on page 15.

2Personalize console settings if desired.

See HOW TO PERSONALIZE CONSOLE SET- TINGS on page 15.

3Select the manual mode.

Each time the key is inserted, the manual mode will be selected. If you have selected a program, press any of the program buttons repeatedly until the word MANUAL appears in the display.

4Start the walking belt and adjust the speed.

To start the walking belt, press the Start button, the Speed increase button next to the Start but- ton, or one of the twelve Zip-Speed buttons.

If the Start button or the Speed increase button is pressed, the walking belt will begin to move at 1 mph. As you exercise, change the speed of the walking belt as desired by pressing the Speed in- crease and decrease buttons next to the Start but- ton. Each time a button is pressed, the speed set- ting will change by 0.1 mph; if a button is held down, the speed setting will change in increments of 0.5 mph. If one of the twelve Zip-Speed buttons is pressed, the walking belt will gradually increase in speed until it reaches the selected speed set- ting.

To stop the walking belt, press the Stop button. To restart the walking belt, press the Start button, the Speed increase button, or one of the twelve Zip- Speed buttons.

5Change the incline of the treadmill as desired. To change the incline of the treadmill, press one of the twelve Zip-Incline buttons. Each time one of the buttons is pressed, the incline will gradually in- crease until it reaches the selected incline setting.

6progress with the display and the intensity level bar.

As you walk or run on the treadmill, the display can show the following workout information:

•The elapsed time.

•The distance that you have walked or run.

•The speed of the walking belt.

•The incline level of the treadmill.

•The approximate number of calories you have burned.

•The approximate number of grams of carbs you have burned.

•Your walking or running pace, in minutes per mile or minutes per kilometer.

•Your heart rate. Note: Your heart rate can be displayed only while you use the handgrip pulse sensor or the chest pulse sensor.

•In addition, the display can show a “workout history”—a profile that represents the speed settings that you select during your workout. At the beginning of each minute of your workout, an additional column will appear in the profile; as you increase or decrease the speed setting, the height of the column will increase or de- crease.

•The display can also show an animation of a runner on a road. As you increase or decrease

the speed setting, the runner will speed up or slow down.Select a display mode and monitor your

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Call TOLL-FREE QUESTIONS?Model No. NTL21905.2 Serial No Table of Contents Important Precautions Page Power Lines Service Right Side Before YOU BeginFront Assembly Left side Treadmill Page Page Page HOW to PUT on the Chest Pulse Sensor HOW to USE the Chest Pulse SensorChest Pulse Sensor Troubleshooting Chest Pulse Sensor Care and MaintenancePRE-LUBRICATED Walking Belt HOW to Plug in the Power CordTreadmill Operation Features of the Console HOW to Personalize Console Settings HOW to Turn on the PowerSelect the users mode Select the settings modeMode, remove the key Personalize console settings if desired HOW to USE the Manual ModeSelect the manual mode Start the walking belt and adjust the speedWhenkey. you are finished exercising, remove Measure your heart rate if desiredTurn on the fans if desired Select a Cardio program HOW to USE a Cardio ProgramPress the Start button to start the program Progress with the displaySelect a Calorie program When you are finished using the treadmillHOW to USE a Calorie Program HOW to Create a Record Program HOW to USE a Distance ProgramSelect a Distance program Select a Record programHOW to USE a Record Program Desired HOW to USE a Pulse ProgramSelect a Pulse program See on Insert an iFIT Card and select a program HOW to USE AN Ifit CardHOW to USE the TV Settings Mode HOW to Operate the Personal TelevisionChannels into the television’s memory HOW to Adjust the Cushioning SystemHOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Lower the Treadmill for USE Problem The power turns off during use TroubleshootingTop View Problem The walking belt slows when walked onProblem The chest pulse sensor does not function properly Problem Television reception is poorExercise Intensity Exercise GuidelinesWorkout Guidelines Exercise FrequencyQty Description R1107AHOW to Order Replacement Parts Exploded DRAWING-Model No. NTL21905.2 Exploded Drawing -Model Limited Warranty
Top Page Image Contents