HOW to USE a Record Program

Select a display mode and program the

5 desired speed and incline settings.

When a Record program is selected, the console offers three display modes. Press the Display but- ton repeatedly to select the desired display mode.

To program a speed setting and an incline setting for the first one-minute segment of the program, simply adjust the speed and incline of the tread- mill as desired by pressing the Speed and Incline buttons.

When the first segment ends, a series of tones will sound and the current speed setting and the cur- rent incline setting will be saved in memory.

Program a speed setting and an incline setting for the second segment as described above. Continue programming speed and incline settings for up to 30 segments.

When you are finished with your workout, press the Stop button twice. The Record program will then be saved in memory.

6 When you are finished exercising, remove the key from the console.

See step 8 on page 20.

1Insert the key into the console.

See HOW TO TURN ON THE POWER on page 15.

2Personalize console settings if desired.

See HOW TO PERSONALIZE CONSOLE SET- TINGS on page 15.

3Select a Record program.

To select a Record program, press the Record button once or twice.

When a Record program is selected, the display will show the name of the program, the maximum incline setting of the program, and the maximum speed setting. In addition, a profile of the speed settings of the program will appear in the display.

Note: If the display shows a program time of three minutes, see HOW TO CREATE A RECORD PROGRAM on page 21.

Each Record program is divided into one-minute segments. One speed setting and one incline set- ting are programmed for each segment.

4Press the Start button to start the program.

A moment after the button is pressed, the tread- mill will automatically adjust to the first speed and incline settings that you programmed previously. Hold the handrails and begin walking.

5progress with the display.

The Record program will function in the same way as a Cardio program (see step 5 on page 19).

If desired, you can redefine the program while using it. To change the speed or incline setting for the current segment, simply press the Speed or Incline buttons. When the current segment ends, the new setting will be saved in memory. To in- crease the length of the program, first wait until the program ends. Then, press the Start button and program speed and incline settings for as many ad- ditional segments as desired; Record programs can have up to 30 segments. When you have added as many segments as desired, press the Stop button twice. To decrease the length of the program,

press the Stop button twice at any time before the program ends.Select a display mode and monitor your

6Measure your heart rate if desired. See step 7 on page 18.

7Turn on the fan if desired. See step 8 on page 18.

8 When you are finished exercising, remove the key from the console.

See step 8 on page 20.