INTRODUCTION IMPORTANT
PRECAUTIONS
ASSEMBLY
BEFORE
YOU BEGIN
TREADMILL
OPERATION
CONDITIONING TROUBLESHOOTING LIMITED
GUIDELINES & MAINTENANCE WARRANTY
12
A S S E M B LY STEP 4
HARDWARE BAG 4 CONTENTS :
BOLT (L) 15 mm Qty: 4
CONSOLE MAST |
SUPPORT BAR |
BOLT (L) |
AOpen Hardware Bag 4.
BAlign SUPPORT BAR with holes in CONSOLE MASTS.
CInsert BOLTS (L) into all 4 holes of the SUPPORT BAR.
NOTE: Look into holes in the right mast before inserting bolts to avoid pinching cables.
DTighten all console bolts (Step 3) and support bar bolts (Step 4) completely.
A S S E M B LY STEP 5
HARDWARE BAG 5 CONTENTS :
BOLT (M) | ARC WASHER (K) |
120 mm | 17 mm |
Qty: 4 | Qty: 4 |
BOLT (M) |
ARC WASHER (K) |
CONSOLE MAST |
HANDLEBARS |
A Open HARDWARE BAG 5. |
BAttach LEFT HANDLEBAR to CONSOLE MAST using 2 BOLTS (M) and 2 ARC WASHERS (K). NOTE: Look into holes before inserting bolt to prevent cables from
being damaged.
CRepeat on other side.
13
IMPORTANT PRECAUTIONS INTRODUCTION
ASSEMBLY
BEFORE YOU BEGIN
TREADMILL OPERATION
LIMITED TROUBLESHOOTING CONDITIONING WARRANTY & MAINTENANCE GUIDELINES
T93_Rev.1.5.indd | 6/20/08 2:05:23 PM |