Reebok Fitness RBTL09906.1 manual Press the On/Off button again and select a Cable connection

Press the On/Off button again and add or

3 delete cable channels.

Note: Complete this step only if you are using analog cable.

After all valid cable channels available in your area have been saved into the television’s mem- ory (see step 5 below), you can manually add channels or delete unwanted channels.

To add or delete a cable channel, first press the Channel buttons until the desired channel number appears on the screen. Then, press the Volume increase button to add the channel, or the Volume decrease button to delete the channel. Continue this process until you have added all desired channels and deleted all unwanted channels.

Press the On/Off button again and select a

4 cable connection.

If you have connected a CATV cable, one of the three cable settings should be selected; try all three cable settings, if necessary, to find the opti- mal setting. Press the Volume increase button to select the Standard Cable setting, the Channel decrease button to select the Cable IRC setting, or the Channel increase button to select the Cable HRC setting.Note: The setting that you select will not appear on the screen.

Press the On/Off button again and save cable

5 channels into the television’s memory.

When the On/Off button is pressed, the television will begin scanning all of the channels available in your area. When no cable signal is detected on a

channel, the channel will be skipped. When a cable signal is detected, the channel will be saved into memory and the next channel will be se- lected. This process will continue until the highest channel is reached. Do not remove the key while the television is scanning channels. Note: If you are viewing channels through an ex- ternal source such as a cable box or a VCR, the television will save only the channel used by the external source.

When you are finished using the information

6 mode, remove the key.

To exit the information mode at any time (except while the television is scanning channels), remove the key from the console.

THE OPTIONAL CHEST PULSE SENSOR

An optional chest pulse sensor provides hands-free operation and allows you to use the console’s heart rate programs. To purchase the optional chest pulse sensor, call the telephone number on the front cover of this manual.

22