THE INFORMATION MODE
The console features an information mode that keeps track of treadmill usage information. The information mode also allows you to select miles or kilometers as the unit of measurement and to turn on and turn off the display demo mode. You can also turn on or turn off the personal trainer and adjust the volume level.
To select the information mode, hold down the Stop button, insert the key into the console, and then re- lease the Stop button. When the information mode is selected, the following information will appear in the display:
The lower left corner of the dis- play will show the number of hours that the treadmill has been operated. The lower right corner of the dis-
play will show the total number of miles or kilometers that the walking belt has moved.
An “E” for English miles or an “M” for metric kilometers will appear in the display. To change the unit of mea- surement, press the Speed increase button.
The console features a display demo mode, designed to be used if the treadmill is displayed in a store. While the demo mode is turned on, the console will function normally when you plug in the power cord, switch the reset/off circuit breaker to the reset position, and insert the key into the console. However, when you remove the key, the displays will remain lit, although the but- tons will not function. If the demo mode is turned on, a “d” will appear in the lower right corner of the display while the information mode is selected. To turn on or turn off the demo mode, press the Speed decrease button.
You can select an audio setting for your personal trainer if desired. When you use an iFit card, a per- sonal trainer will guide you through your workouts. To turn on or turn off the voice of the personal trainer, press the Incline decrease button. The word “ON” or the word “OFF” will appear in the display.
To adjust the volume level, press the Incline increase button.
To exit the information mode, remove the key from the console.
HOW TO USE THE STEREO SOUND SYSTEM
To play music or audio books through the consoleʼs stereo speakers, you must connect your MP3 player, CD player, or other personal audio player to the con- sole through the audio jack.
To use the audio jack, locate the audio wire and plug it into the audio jack near the speakers. Then, plug the audio wire into a jack on your MP3 player, CD player, or other personal audio player. Make sure that the audio wire is fully inserted.
Next, press the Play button on your MP3 player, CD player, or other personal audio player. Adjust the vol- ume on your personal audio player or with the Vol in- crease and decrease buttons on the console. Note: If the volume cannot be turned up, make sure the vol- ume level is not set at 0 (see THE INFORMATION MODE on this page).
If you are using a personal CD player and the CD skips, set the CD player on the floor or another flat sur- face instead of on the console.
19