Reebok Fitness RBTL76009.0 manual Correct Incorrect

3.	Identify the Right Upright (85) and the Right	3
	Upright Spacer (91), which are marked with
	“Right” stickers.	87			85
	Insert the Upright Wire (87) through the Right		Wire Tie
	Upright Spacer (91) as shown. Set the Right				87
	Upright Spacer on the Base (95). See inset
	drawings B and C. Make sure that the Right				91
	Upright Spacer sits flush against the Base. If				95
	necessary, turn the Right Upright Spacer and
	try again.	A
	Have a second person hold the Right Upright
	(85) near the Base (95). See inset drawing A.
	Tie the wire tie in the Right Upright securely		85
	around the end of the Upright Wire (87). Then,
	pull the other end of the wire tie until the Upright		Wire
	Wire is routed completely through the Right	87
	Upright.		Tie
		B	Correct	C	Incorrect
		91	95	91	95
4. Hold a Bolt Spacer (14) inside the lower end of		4
	the Right Upright (85). Insert a 3/8" x 4" Patch				7
	Bolt (7) with a 3/8" Star Washer (11) into the
	Right Upright and the Bolt Spacer. Repeat this		85
	step with a second Bolt Spacer (14), 3/8" x 4"				11
	Patch Bolt (7), and 3/8" Star Washer (11).
	Hold the Right Upright (85) against the Right				8
	Upright Spacer (91). Be careful not to pinch				14
	the Upright Wire (87). Tighten the 3/8" x 4"
	Patch Bolts (7) until the heads of the Patch Bolts
	touch the Upright; do not fully tighten the				91
	Patch Bolts yet.
		8