The Speed display— This display will show the speed of the walking
belt.
To reset the displays, press the Stop button, re- move the key, and then reinsert the key.
6. Measure your heart rate if desired. |
|
Before using the |
|
handgrip pulse | Contacts |
sensor, remove | |
the sheets of |
|
clear plastic from |
|
the metal con- |
|
tacts. In addition, |
|
make sure that |
|
your hands are |
|
clean. |
|
To measure your heart rate, stand on the foot rails and hold the metal contacts on the handrail—
avoid moving your hands. When your pulse is detected, your heart rate will be shown. For the most accurate heart rate reading, continue to hold the contacts for about 15 seconds.
7.When you are finished exercising, remove the key from the console.
Step onto the foot rails, press the Stop button, and adjust the incline of the treadmill to the lowest setting. The incline must be at the lowest set- ting when you fold the treadmill to the storage position, or you may damage the treadmill. Next, remove the key from the console and put it in a secure place.
When you are finished using the treadmill, switch the reset/off circuit breaker to the “off” position and unplug the power cord. IMPORTANT: If you do not do this, the treadmillʼs electrical compo- nents may wear prematurely.
15