Reebok Fitness RBTL79607.1 manual Assembly, Make sure that the power cord is unplugged

Page 6

ASSEMBLY

To hire an authorized service technician to assemble the treadmill, call 1-800-445-2480.

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, some lubricant may be transferred to the top of the walking belt or the shipping carton. This is normal and does not affect treadmill performance. If there is lubri- cant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included hex key

and your own Phillips screwdriver

, rubber

mallet

, and adjustable wrench

.

 

Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of the manual. The number after the parentheses shows the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it is preat- tached to one of the parts to be assembled. Extra hardware may be included. To avoid damaging plastic parts, do not use power tools for assembly.

#8 x 3/4"

5/16" Star

3/8" Star

3/8" Nut (11)–2

Extension Leg

Screw (6)–6

Washer (9)–4

Washer (8)–8

Nut (10)–4

#8 x 1" Tek Screw

#8 x 2 1/4" Screw (7)–4

 

5/16" x 2" Bolt (2)–4

(1)–4

 

 

 

 

3/8" x 1" Bolt (4)–6

3/8" x 1 3/4" Bolt (3)–2

3/8" x 2 3/4" Bolt (5)–2

1. Make sure that the power cord is unplugged.

1

85

 

 

 

With the help of a second person, carefully tip

 

 

81

 

the treadmill onto its left side as shown. Partially

 

 

 

 

1

fold the Frame (55) so that the treadmill is more

 

 

 

 

stable. Do not fully fold the Frame until the

 

 

 

 

 

treadmill is completely assembled.

 

 

81

 

 

Attach two Base Pads (81) to the Base (85) with

 

 

1

 

two #8 x 1" Tek Screws (1).

 

55

 

 

 

 

 

 

 

 

6

 

 

 

 

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Mon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MT QUESTIONS?Model No. RBTL79607.1 Serial No On the WEBTable of Contents Important Precautions Pulse sensor is not a medical devicePage Before YOU Begin Assembly Make sure that the power cord is unpluggedPage Before tightening either of them Wire Harnesses 73, 119 are not pinched Pull on the sleeve to make sure that it is locked into place Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Console Diagram Features of the ConsoleHOW to Turn on the Power HOW to USE the Manual ModeInsert the key into the console Time/Pace Measure your heart rate if desired HOW to USE a Classic Workout Select a classic workoutFollow your progress with the matrix and the displays HOW to USE a Weight Loss Workout Enter your weightSelect a weight loss workout HOW to Create a Custom Workout Select one of the custom workoutsHOW to USE a Custom Workout Information Mode HOW to USE the Sound SystemMake sure that the audio wire is fully plugged HOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Lower the Treadmill for USEImportant The treadmill is not TroubleshootingProblem The power turns off during use Compatible with GFCI-equipped outletsProblem The walking belt slows when walked on TopProblem Solution Workout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencyPart LIST-Model No. RBTL79607.1 Qty DescriptionQty Exploded Drawing A-Model No. RBTL79607.1 R0709A Exploded Drawing B-Model No. RBTL79607.1 R0709A Exploded Drawing C-Model No. RBTL79607.1 R0709A Exploded Drawing D-Model No. RBTL79607.1 R0709A Ordering Replacement Parts Limited WarrantyIcon Health & Fitness, Inc., 1500 S W., Logan, UT
Top Page Image Contents