Epic Fitness EPTL09106.2 manual HOW to Turn on the Power, HOW to USE the Manual Mode

Page 14

HOW TO TURN ON THE POWER

IMPORTANT: If the treadmill has been exposed to cold temperatures, allow it to warm to room tem- perature before turning on the power. If you do not do this, the console displays or other electrical components may become damaged.

Plug in the power cord

 

 

 

 

 

 

 

 

 

 

 

 

(see page 12). Next, lo-

 

 

 

 

 

 

cate the reset/off circuit

 

 

 

 

 

 

 

Reset

 

 

 

 

 

breaker near the power

 

Position

 

 

 

 

 

 

 

 

 

 

 

 

 

 

cord. Make sure that the

 

 

 

 

 

 

 

 

 

 

 

 

circuit breaker is in the

 

 

 

 

 

 

 

 

 

 

 

 

reset position.

 

 

 

 

 

 

Next, stand on the foot rails of the treadmill. Find the clip attached to the key (see the drawing on page 13) and attach the clip securely to the waistband of your clothes. Then, insert the key into the console. After a moment, the displays will light, and after a few sec- onds, the television will turn on. Important: In an emergency situation, the key can be pulled from the console, causing the walking belt to slow to a stop. Test the clip by carefully taking a few steps backward until the key is pulled from the console. If the key is not pulled from the console, adjust the position of the clip as needed.

HOW TO USE THE MANUAL MODE

1 Insert the key into the console.

See HOW TO TURN ON THE POWER above.

2 Select the manual mode.

When the key is inserted, the manual mode will be selected. If you have se- lected a program, reselect the manual mode by press- ing the Programs (PRGM.) button repeatedly until a track appears in the left dis- play.

3 Start the walking belt.

To start the walking belt, press the Start button, the Speed increase button, or one of the twelve numbered Speed buttons.

If the Start button or the Speed increase button is pressed, the walking belt will begin to move at 1 mph. As you exercise, change the speed of the walking belt as desired by pressing the Speed in- crease and decrease buttons. Each time a button is pressed, the speed setting will change by 0.1 mph; if a button is held down, the speed setting will change in increments of 0.5 mph. Note: After the buttons are pressed, it may take a moment for the walking belt to reach the selected speed setting.

If one of the numbered Speed buttons is pressed, the walking belt will gradually increase in speed until it reaches the selected speed setting.

To stop the walking belt, press the Stop button. The time will begin to flash in the left display. To restart the walking belt, press the Start button, the Speed increase button, or one of the numbered Speed buttons.

4 Change the incline of the treadmill as desired.

To change the incline of the treadmill, press the Incline buttons. Each time a button is pressed, the incline will change by 0.5%. To change the incline setting quickly, press the numbered Incline buttons. Note: After the buttons are pressed, it may take a moment for the treadmill to reach the selected in- cline setting.

5 Follow your progress with the two displays.

The left display—This dis- play will show the elapsed time. Note: When a program is selected (except for heart rate program 10 or a custom program), this display will show the time remaining in the program instead of the elapsed time.

When the manual mode is selected, the left display will also show a track. As you exercise, the indica- tors around the track will appear in succession until the entire track appears. The track will then disappear the indicators will again begin to appear in succession.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Call TOLL-FREE QUESTIONS?Model No. EPTL09106.2 Serial No Mon.-Fri., 6 a.m.-6 p.m. MSTTable of Contents Important Precautions Page Power Lines Service Before YOU Begin Back Right SideCutters AssemblyMake sure that the power cord is unplugged Bolts and then firmly tighten them Knob Spring Collar Pin Bracket Cylinder Holes Ohm Terminal HOW to Connect a 75 OHM Catv Cable HOW to Connect AN External Source Using a Catv CablePRE-LUBRICATED Walking Belt Operation and AdjustmentHOW to Plug in the Power Cord Features of the Console HOW to Turn on the Power HOW to USE the Manual ModeMeasure your heart rate if desired Turn on the fan if desiredHOW to USE a Preset Program Select a preset programExploded On this see the Part user’s manualExploded DRAWING-Model No. EPTL09106.2 Follow your progress with the displays Select a heart rate program HOW to USE a Heart Rate ProgramPut on the chest pulse sensor Follow your progress with the displays HOW to Create a Custom Program Select a custom programHOW to USE a Custom Program HOW to USE the Information Mode HOW to Operate the Personal TelevisionPress the Volume VOL. buttons to adjust Turn on the televisionPress the On/Off button again and select a Cable connection Optional Chest Pulse SensorHOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useProblem The walking belt slows when walked on Top Problem Television reception is poor Workout Guidelines Conditioning GuidelinesExercise Intensity Exercise FrequencySuggested Stretches R1207A Qty DescriptionIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT Ordering Replacement PartsLimited Warranty

EPTL09106.2 specifications

The Epic Fitness EPTL09106.2 is a premium treadmill designed for both novice and seasoned athletes seeking a robust and versatile workout experience. This treadmill is engineered to complement a variety of fitness regimens, making it a valuable addition to any home gym. Its design reflects a commitment to durability, performance, and user comfort.

One of the standout features of the EPTL09106.2 is its powerful motor, which boasts a continuous duty rating often found in commercial-grade equipment. With a peak performance capability, it allows users to run at higher speeds for extended periods without compromising on performance. The treadmill is also equipped with a spacious running surface, providing ample room for runners to stride comfortably and safely.

The EPTL09106.2 incorporates advanced cushioning technology that reduces impact on joints, promoting better recovery and a more comfortable running experience. This is particularly beneficial for users who are prone to injuries or those who are engaging in longer workout sessions. The FlexDeck shock absorption system is designed to absorb the shock from each footfall, helping to create a smoother and more enjoyable run.

Another remarkable feature is the integrated workout programs. The treadmill offers a variety of pre-set workouts catering to different fitness levels and goals, including weight loss, endurance training, and interval workouts. Users can easily select their desired program using an intuitive console interface, which is designed for user-friendliness.

The EPTL09106.2 also features advanced technology integration, such as Bluetooth compatibility and built-in speakers, allowing users to connect their devices and enjoy their favorite music while they work out. Additionally, a sophisticated LCD display keeps track of essential workout metrics like time, distance, speed, calories burned, and heart rate, providing comprehensive feedback that helps users monitor their progress.

Safety is a priority with the EPTL09106.2, as evidenced by its emergency stop features and sturdy handrails. These safety elements provide peace of mind during intense workouts, ensuring that users can focus on their fitness without worrying about potential hazards.

In conclusion, the Epic Fitness EPTL09106.2 treadmill seamlessly combines advanced technology, user-centric features, and superior durability, making it an excellent choice for fitness enthusiasts aiming to enhance their training experience. With its powerful motor, cushioning system, and an array of workout options, it stands as a testament to Epic's commitment to providing quality fitness equipment.
Top Page Image Contents