Epic Fitness EPTL09106.2 manual Knob Spring Collar Pin Bracket Cylinder Holes

Page 9

5.Press the Latch Housing (73) into the left Upright (84). Use a rubber mallet, if necessary, to fully insert the Latch Housing.

Remove the knob from the pin. Make sure that the collar and the spring are on the pin. (Note: If there are two col- lars, place one on each side of the spring.) Next, insert the pin into the Latch Housing (73). Then, tighten the knob back onto the pin.

Plug in the power cord as described on page 12, and turn on the power as described on page 14. Note: The treadmill may automatically rise to the maximum incline level and then return to the minimum level.

6.Place the treadmill in the storage position (see HOW TO FOLD AND MOVE THE TREADMILL on page 24).

Next, place the cylinder end of the Gas Spring (92) near the bracket on the base of the Uprights (84).

See the two small inset drawings. Using your fingernail or the end of a screwdriver, press on the end of the Spring Pin (25) to loosen it from the Gas Spring (92). Next, rotate the Spring Pin and pull it out of the Gas Spring. Be careful to avoid losing the Spring Pin. Note: Extra Spring Pins are included.

See drawing 5a. Press the cylinder end of the Gas Spring (92) onto the ball on the bracket. Next, insert the end of the Spring Pin (25) into two of the small holes in the end of the Gas Spring. Then, rotate the Spring Pin until it clips onto the Gas Spring.

7.Raise the Gas Spring (92) to a vertical position. Remove the Spring Pin (25) from the raised end of the Gas Spring as described in step 6. If necessary, rotate the Gas Spring to align the end of the Gas Spring with the ball on the bracket on the Frame (58).

Next, press the Incline increase and decrease buttons on the console until the ball on the bracket is aligned with the end of the Gas Spring (92). Then, press the end of the Gas Spring onto the ball. Note: It may be necessary to press the end of the Gas Spring onto the ball while the Frame (58) is moving.

See drawing 7a. Insert the Spring Pin (25) into the two indicated small holes in the end of the Gas Spring (92). Then, rotate the Spring Pin until it clips onto the Gas Spring.

Press the Incline decrease button until the treadmill is at the lowest incline level. Then, unplug the power cord.

5

 

 

 

 

Knob

 

 

 

 

 

Spring

 

73

 

Collar

 

84

 

 

 

 

 

Pin

6

 

 

25

 

 

 

 

84

 

 

 

25

 

 

 

92

Bracket

 

 

 

25

 

 

 

 

 

Cylinder

 

5a

 

 

 

 

25

 

 

 

92

Bracket

 

 

7

58

 

 

 

 

 

Bracket

 

 

 

25

 

 

 

92

 

7a

 

 

 

Holes

92

25

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Model No. EPTL09106.2 Serial No QUESTIONS?Call TOLL-FREE Mon.-Fri., 6 a.m.-6 p.m. MSTTable of Contents Important Precautions Page Power Lines Service Back Right Side Before YOU BeginAssembly Make sure that the power cord is unpluggedCutters Bolts and then firmly tighten them Knob Spring Collar Pin Bracket Cylinder Holes Ohm Terminal HOW to Connect AN External Source Using a Catv Cable HOW to Connect a 75 OHM Catv CableOperation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Features of the Console HOW to USE the Manual Mode HOW to Turn on the PowerTurn on the fan if desired Measure your heart rate if desiredSelect a preset program HOW to USE a Preset ProgramOn this see the Part user’s manual ExplodedExploded DRAWING-Model No. EPTL09106.2 Follow your progress with the displays HOW to USE a Heart Rate Program Put on the chest pulse sensorSelect a heart rate program Follow your progress with the displays Select a custom program HOW to Create a Custom ProgramHOW to USE a Custom Program Press the Volume VOL. buttons to adjust HOW to Operate the Personal TelevisionHOW to USE the Information Mode Turn on the televisionOptional Chest Pulse Sensor Press the On/Off button again and select a Cable connectionHOW to Fold and Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Move the Treadmill HOW to Lower the Treadmill for USE Problem The power turns off during use TroubleshootingProblem The walking belt slows when walked on Top Problem Television reception is poor Exercise Intensity Conditioning GuidelinesWorkout Guidelines Exercise FrequencySuggested Stretches Qty Description R1207AOrdering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT

EPTL09106.2 specifications

The Epic Fitness EPTL09106.2 is a premium treadmill designed for both novice and seasoned athletes seeking a robust and versatile workout experience. This treadmill is engineered to complement a variety of fitness regimens, making it a valuable addition to any home gym. Its design reflects a commitment to durability, performance, and user comfort.

One of the standout features of the EPTL09106.2 is its powerful motor, which boasts a continuous duty rating often found in commercial-grade equipment. With a peak performance capability, it allows users to run at higher speeds for extended periods without compromising on performance. The treadmill is also equipped with a spacious running surface, providing ample room for runners to stride comfortably and safely.

The EPTL09106.2 incorporates advanced cushioning technology that reduces impact on joints, promoting better recovery and a more comfortable running experience. This is particularly beneficial for users who are prone to injuries or those who are engaging in longer workout sessions. The FlexDeck shock absorption system is designed to absorb the shock from each footfall, helping to create a smoother and more enjoyable run.

Another remarkable feature is the integrated workout programs. The treadmill offers a variety of pre-set workouts catering to different fitness levels and goals, including weight loss, endurance training, and interval workouts. Users can easily select their desired program using an intuitive console interface, which is designed for user-friendliness.

The EPTL09106.2 also features advanced technology integration, such as Bluetooth compatibility and built-in speakers, allowing users to connect their devices and enjoy their favorite music while they work out. Additionally, a sophisticated LCD display keeps track of essential workout metrics like time, distance, speed, calories burned, and heart rate, providing comprehensive feedback that helps users monitor their progress.

Safety is a priority with the EPTL09106.2, as evidenced by its emergency stop features and sturdy handrails. These safety elements provide peace of mind during intense workouts, ensuring that users can focus on their fitness without worrying about potential hazards.

In conclusion, the Epic Fitness EPTL09106.2 treadmill seamlessly combines advanced technology, user-centric features, and superior durability, making it an excellent choice for fitness enthusiasts aiming to enhance their training experience. With its powerful motor, cushioning system, and an array of workout options, it stands as a testament to Epic's commitment to providing quality fitness equipment.
Top Page Image Contents