Epic Fitness EPTL09106.2 manual Ohm Terminal

Page 10

8.Note the location of the 75 ohm terminal on the treadmill. For the television to operate properly, a CATV cable must be connected to the 75 ohm terminal (see page 11).

8

75 Ohm Terminal

9.Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of clear plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the tread- mill. Note: Extra hardware may be included. Keep the included hex key in a secure place; the hex key is used to adjust the walking belt (see page 27).

If you purchase the optional chest pulse sensor (see page 23), follow the steps below to install the receiver included with the chest pulse sensor.

1.Make sure that the key is removed from the con- sole and that the power cord is unplugged.

Remove the indicated Screws (3) from the back of the Console Base (85).

2.Connect the wire on the receiver (A) to the indicated wire on the Console (34). Hold the receiver so the small cylinder is oriented as shown. Next, remove the tape from the back of the receiver, and press the receiver onto the Console Base (85) in the location shown.

3.Make sure that no wires are pinched. Reattach the Console (34) with the Screws (3). Discard the other wires included with the receiver.

34

Small Cylinder

 

A

 

 

85

 

 

Wire

 

 

 

 

3

 

3

 

 

3

3

 

 

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Call TOLL-FREE QUESTIONS?Model No. EPTL09106.2 Serial No Mon.-Fri., 6 a.m.-6 p.m. MSTTable of Contents Important Precautions Page Power Lines Service Before YOU Begin Back Right SideMake sure that the power cord is unplugged AssemblyCutters Bolts and then firmly tighten them Knob Spring Collar Pin Bracket Cylinder Holes Ohm Terminal HOW to Connect a 75 OHM Catv Cable HOW to Connect AN External Source Using a Catv CableHOW to Plug in the Power Cord Operation and AdjustmentPRE-LUBRICATED Walking Belt Features of the Console HOW to Turn on the Power HOW to USE the Manual ModeMeasure your heart rate if desired Turn on the fan if desiredHOW to USE a Preset Program Select a preset programExploded On this see the Part user’s manualExploded DRAWING-Model No. EPTL09106.2 Follow your progress with the displays Put on the chest pulse sensor HOW to USE a Heart Rate ProgramSelect a heart rate program Follow your progress with the displays HOW to Create a Custom Program Select a custom programHOW to USE a Custom Program HOW to USE the Information Mode HOW to Operate the Personal TelevisionPress the Volume VOL. buttons to adjust Turn on the televisionPress the On/Off button again and select a Cable connection Optional Chest Pulse SensorHOW to Fold the Treadmill for Storage HOW to Fold and Move the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useProblem The walking belt slows when walked on Top Problem Television reception is poor Workout Guidelines Conditioning GuidelinesExercise Intensity Exercise FrequencySuggested Stretches R1207A Qty DescriptionLimited Warranty Ordering Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT

EPTL09106.2 specifications

The Epic Fitness EPTL09106.2 is a premium treadmill designed for both novice and seasoned athletes seeking a robust and versatile workout experience. This treadmill is engineered to complement a variety of fitness regimens, making it a valuable addition to any home gym. Its design reflects a commitment to durability, performance, and user comfort.

One of the standout features of the EPTL09106.2 is its powerful motor, which boasts a continuous duty rating often found in commercial-grade equipment. With a peak performance capability, it allows users to run at higher speeds for extended periods without compromising on performance. The treadmill is also equipped with a spacious running surface, providing ample room for runners to stride comfortably and safely.

The EPTL09106.2 incorporates advanced cushioning technology that reduces impact on joints, promoting better recovery and a more comfortable running experience. This is particularly beneficial for users who are prone to injuries or those who are engaging in longer workout sessions. The FlexDeck shock absorption system is designed to absorb the shock from each footfall, helping to create a smoother and more enjoyable run.

Another remarkable feature is the integrated workout programs. The treadmill offers a variety of pre-set workouts catering to different fitness levels and goals, including weight loss, endurance training, and interval workouts. Users can easily select their desired program using an intuitive console interface, which is designed for user-friendliness.

The EPTL09106.2 also features advanced technology integration, such as Bluetooth compatibility and built-in speakers, allowing users to connect their devices and enjoy their favorite music while they work out. Additionally, a sophisticated LCD display keeps track of essential workout metrics like time, distance, speed, calories burned, and heart rate, providing comprehensive feedback that helps users monitor their progress.

Safety is a priority with the EPTL09106.2, as evidenced by its emergency stop features and sturdy handrails. These safety elements provide peace of mind during intense workouts, ensuring that users can focus on their fitness without worrying about potential hazards.

In conclusion, the Epic Fitness EPTL09106.2 treadmill seamlessly combines advanced technology, user-centric features, and superior durability, making it an excellent choice for fitness enthusiasts aiming to enhance their training experience. With its powerful motor, cushioning system, and an array of workout options, it stands as a testament to Epic's commitment to providing quality fitness equipment.
Top Page Image Contents