Epic Fitness EPTL09106.2 manual Troubleshooting, Problem The power turns off during use

Page 28

TROUBLESHOOTING

Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please see the front cover of this manual.

PROBLEM: The power does not turn on

SOLUTION: a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor is plugged into a properly grounded outlet (see page 12). Use only a single-outlet surge suppres- sor that meets all of the specifications described on page 12. Important: The treadmill is not com- patible with GFCI-equipped outlets.

b. After the power cord has been plugged in, make sure that the key is inserted into the console.

c.Check the reset/off circuit breaker located on the treadmill frame near the power cord. If the switch protrudes as shown, the circuit breaker has tripped. To reset the circuit breaker, wait for five minutes, and then press the switch back in.

c

Tripped

Reset

PROBLEM: The power turns off during use

SOLUTION: a. Check the reset/off circuit breaker (see the drawing above). If the circuit breaker has tripped, wait for five minutes and then press the switch back in.

b.Make sure that the power cord is plugged in. If the power cord is plugged in, unplug it, wait for five minutes, and then plug it back in.

c.Remove the key from the console. Reinsert the key into the console.

d.If the treadmill still will not run, please see the front cover of this manual.

PROBLEM: The incline of the treadmill does not change correctly

SOLUTION: a. With the key in the console, press one of the Incline buttons. While the incline is changing, re- move the key. After a few seconds, re-insert the key. The treadmill will automatically rise to the maximum incline level and then return to the minimum level. This will recalibrate the incline system.

PROBLEM: The display of the console does not function properly

 

 

SOLUTION: a. Remove the key from the console and UNPLUG

a

 

THE POWER CORD. With the help of a second per-

7

3

son, carefully tip the Uprights (84) down as shown.

 

 

Next, remove the three Screws (3) and the three

 

 

Hood Screws (7). Note: A phillips screwdriver with a

 

 

shaft at least 5” long is required.

 

 

 

 

3

 

 

84

26

Page 27 Page 29
Image 28
Page 27 Page 29
Contents QUESTIONS? Model No. EPTL09106.2 Serial NoCall TOLL-FREE Mon.-Fri., 6 a.m.-6 p.m. MSTTable of Contents Important Precautions Page Power Lines Service Before YOU Begin Back Right SideMake sure that the power cord is unplugged AssemblyCutters Bolts and then firmly tighten them Knob Spring Collar Pin Bracket Cylinder Holes Ohm Terminal HOW to Connect a 75 OHM Catv Cable HOW to Connect AN External Source Using a Catv CableHOW to Plug in the Power Cord Operation and AdjustmentPRE-LUBRICATED Walking Belt Features of the Console HOW to Turn on the Power HOW to USE the Manual ModeMeasure your heart rate if desired Turn on the fan if desiredHOW to USE a Preset Program Select a preset programExploded On this see the Part user’s manualExploded DRAWING-Model No. EPTL09106.2 Follow your progress with the displays Put on the chest pulse sensor HOW to USE a Heart Rate ProgramSelect a heart rate program Follow your progress with the displays HOW to Create a Custom Program Select a custom programHOW to USE a Custom Program HOW to Operate the Personal Television Press the Volume VOL. buttons to adjustHOW to USE the Information Mode Turn on the televisionPress the On/Off button again and select a Cable connection Optional Chest Pulse SensorHOW to Fold the Treadmill for Storage HOW to Fold and Move the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useProblem The walking belt slows when walked on Top Problem Television reception is poor Conditioning Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencySuggested Stretches R1207A Qty DescriptionLimited Warranty Ordering Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT

EPTL09106.2 specifications

The Epic Fitness EPTL09106.2 is a premium treadmill designed for both novice and seasoned athletes seeking a robust and versatile workout experience. This treadmill is engineered to complement a variety of fitness regimens, making it a valuable addition to any home gym. Its design reflects a commitment to durability, performance, and user comfort.

One of the standout features of the EPTL09106.2 is its powerful motor, which boasts a continuous duty rating often found in commercial-grade equipment. With a peak performance capability, it allows users to run at higher speeds for extended periods without compromising on performance. The treadmill is also equipped with a spacious running surface, providing ample room for runners to stride comfortably and safely.

The EPTL09106.2 incorporates advanced cushioning technology that reduces impact on joints, promoting better recovery and a more comfortable running experience. This is particularly beneficial for users who are prone to injuries or those who are engaging in longer workout sessions. The FlexDeck shock absorption system is designed to absorb the shock from each footfall, helping to create a smoother and more enjoyable run.

Another remarkable feature is the integrated workout programs. The treadmill offers a variety of pre-set workouts catering to different fitness levels and goals, including weight loss, endurance training, and interval workouts. Users can easily select their desired program using an intuitive console interface, which is designed for user-friendliness.

The EPTL09106.2 also features advanced technology integration, such as Bluetooth compatibility and built-in speakers, allowing users to connect their devices and enjoy their favorite music while they work out. Additionally, a sophisticated LCD display keeps track of essential workout metrics like time, distance, speed, calories burned, and heart rate, providing comprehensive feedback that helps users monitor their progress.

Safety is a priority with the EPTL09106.2, as evidenced by its emergency stop features and sturdy handrails. These safety elements provide peace of mind during intense workouts, ensuring that users can focus on their fitness without worrying about potential hazards.

In conclusion, the Epic Fitness EPTL09106.2 treadmill seamlessly combines advanced technology, user-centric features, and superior durability, making it an excellent choice for fitness enthusiasts aiming to enhance their training experience. With its powerful motor, cushioning system, and an array of workout options, it stands as a testament to Epic's commitment to providing quality fitness equipment.
Top Page Image Contents