Healthrider HRT99020 manual Next settings of the CD or video program, Ton or the Speed

Page 18

If the speed or incline settings are too high or too low, you can manually override the settings at any time by pressing the Speed or Incline buttons on

the console. However, when the next “chirp” is heard, the speed and/or incline will change to

the next settings of the CD or video program.


To stop the walking belt at any time, press the
Stop button on the console. The Time/Incline/
Segment Time display will begin to flash. To
restart the program, press the Start button or the
Speed	▲ button. After a moment, the walking belt
will begin to move.		When the next “chirp” is
heard, the speed and incline will change to the
next settings of the CD or video program			.

When the CD or video program is completed, the

walking belt will stop and the Tim e/Incline/Segment Time display will begin to flash. Note: To use an-

other CD or video program, press the Stop button or remove the key and go to step 1 on page 17.

Note: If the speed or incline of the treadmill does not change when a “chirp” is heard:

•Make sure that the iFIT.com indicator is lit and that the Time/Incline/Segment Time display is not flashing. If the Time/Incline/ Segment Time display is flashing, press the Start but-

ton or the Speed

▲ button on the console.

•Adjust the volume of your CD player or VCR. If the volume is too high or too low, the con- sole may not detect the program signals.

•Make sure that the audio cable is properly connected, that it is fully plugged in, and that it is not wrapped around a power cord.

•If you are using your portable CD player and the CD skips, set the CD player on the floor or another flat surface instead of on the console.

•Refer to the instructions at the bottom of page 24.

5 Follow your progress with the displays.

See step 5 on page 10.

6 Measure your heart rate, if desired. Refer to step 6 on page 11.

7 Whenkey. the program is completed, remove the

See step 6 on page 13.

CAUTION: Always remove iFIT.com CD’s and videocassettes from your CD player or VCR

when you are finished using them.

18

Image 18

Contents Our factory QUESTIONS?Model No. HRT99020 Serial No Customer HOT LineTable of Contents Important Precautions Use the treadmill only as describedTreadmill is capable of high speeds Page Using the treadmill Before YOU BeginDriver Wire cutters AssemblyAssembly requires two people Insert the other Extension Leg not shown in the same wayTightly as possible Insert two 1/2 Screws 33 intoScrews 105 as shown PostThis product must be grounded.If it should malfunc HOW to Plug in the Power CordPerformant Lube Grounded Outlet Box Surge Suppressor Grounding PinConsole Diagram Features of the ConsoleTo reduce the possibility of electric shock HOW to Turn on the Power HOW to USE the Manual ModeDistance/Laps Display When the treadmill is folded to the storage posiTime/Incline/Segment Speed/Min-Mile DisplayStart the program HOW to USE Personal Trainer ProgramsCompleted, all speed settings will move one col Program displayPut on the chest pulse sensor HOW to USE Heart Rate ProgramsFollow your progress with the displays Select a heart rate programWhen the program is completed, remove Key from the console Enter your ageDecrease HOW to Connect Your Portable CD Player HOW to Connect Your Portable StereoVideocassettes Jack on your stereo HOW to Connect Your Home StereoHOW to Connect Your Computer Adapter CableHOW to Connect Your VCR Ton or the Speed Next settings of the CD or video programWhen you are finished using them Whenkey. the program is completed, removeConsole HOW to USE Programs Directly from OUR WEB SiteFollowprogram.the on-line instructions to start SpeedButtons on the console will not operate If a d ap Information MODE/DEMO ModePlay should be blank If a d Optional Chest Pulse SensorHOW to Fold the Treadmill for Storage HOW to Move the TreadmillHold the treadmill firmly with both hands, and lower HOW to Lower the Treadmill for USEHold the upper end of the treadmill with your right hand Pin CatchProblem The power turns off during use TroubleshootingProblem The power does not turn on PositionProblem The walking belt slows when walked on Magnet is aligned with the Reed SwitchSwitch is about 1/8 Has shifted to the leftWorkout Guidelines Conditioning GuidelinesExercise Intensity Exercise FrequencySuggested Stretches Page Icon Health & FITNESS, INC., 1500 S W., LOGAN, UT HOW to Order Replacement PartsLimited Warranty Part No R1102ARemove this Exploded Drawing and Part List from the Manual Key Description No. Qty. DescriptionKey No. Qty. Description Drawingexploded Model