Healthrider HRT99020 manual Performant Lube, HOW to Plug in the Power Cord

Page 8

OPERATION AND ADJUSTMENT

THE PERFORMANT LUBE

TM WALKING BELT

Your treadmill features a walking belt coated with

PERFORMANT LUBETM , a high-performance lubricant.

IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking plat- form. Such substances will deteriorate the walking belt and cause excessive wear.

HOW TO PLUG IN THE POWER CORD

DANGER: Improper connection of the equipment-grounding conductor can

result in an increased risk of electric shock. Check with a qualified electrician or service- man if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product—if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

Your treadmill, like any other type of sophisticated electronic equipment, can be seriously damaged by sudden voltage changes in your home’s power. Voltage surges, spikes, and noise interference can result from weather conditions or from other appliances

being turned on or off. To decrease the possibility of your treadmill being damaged, always use a surge

suppressor with your treadmill (see drawing 1 at the right). To purchase a surge suppressor, see

your local HealthRider dealer or call 1-800-806-3651 and order part number 146148.

Use only a single-outlet surge suppressor that is UL 1449 listed as a transient voltage surge sup- pressor (TVSS). The surge suppressor must have a UL suppressed voltage rating of 400 volts or less and a minimum surge dissipation of 450 joules.

The surge suppressor must be electrically rated for 120 volts AC and 15 amps. There must be a monitoring light on the surge suppressor to indi- cate whether it is functioning properly. Failure to use a properly functioning surge suppressor could result in damage to the control system of the treadmill. If the control system is damaged, the walking belt may change speed or stop unexpect- edly, which may result in a fall and serious injury.

This product must be grounded.If it should malfunc-

tion or break down, grounding provides a path of least resistance for electric current to reduce the risk of elec- tric shock. This product is equipped with a cord having

an equipment-grounding conductor and a grounding plug. Plug the power cord into a surge suppressor, and plug the surge suppressor into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. Important: The treadmill is not compatible with GFCI-equipped outlets.

This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug illus- trated in drawing 1 below. A temporary adapter that looks like the adapter illustrated in drawing 2 may be used to connect the surge suppressor to a 2-pole receptacle as shown in drawing 2 if a properly grounded outlet is not available.

1

Grounded Outlet Box

Surge Suppressor

Grounding Pin

Grounding Pin

Grounded Outlet

Grounding Plug

 

2

Grounded Outlet Box

Adapter

Surge Suppressor

Lug

Metal Screw

The temporary adapter should be used only until a properly grounded outlet (drawing 1) can be installed by a qualified electrician.

The green-colored rigid ear, lug, or the like extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box cover. Whenever the adapter is used it must be held in place

by a metal screw. Some 2-pole receptacle outlet box covers are not grounded. Contact a qualified elec-

trician to determine if the outlet box cover is grounded before using an adapter.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents QUESTIONS? Model No. HRT99020 Serial NoOur factory Customer HOT LineTable of Contents Treadmill is capable of high speeds Important PrecautionsUse the treadmill only as described Page Using the treadmill Before YOU BeginAssembly Assembly requires two peopleDriver Wire cutters Insert the other Extension Leg not shown in the same wayInsert two 1/2 Screws 33 into Screws 105 as shownTightly as possible PostHOW to Plug in the Power Cord Performant LubeThis product must be grounded.If it should malfunc Grounded Outlet Box Surge Suppressor Grounding PinTo reduce the possibility of electric shock Console DiagramFeatures of the Console HOW to Turn on the Power HOW to USE the Manual ModeWhen the treadmill is folded to the storage posi Time/Incline/SegmentDistance/Laps Display Speed/Min-Mile DisplayHOW to USE Personal Trainer Programs Completed, all speed settings will move one colStart the program Program displayHOW to USE Heart Rate Programs Follow your progress with the displaysPut on the chest pulse sensor Select a heart rate programDecrease When the program is completed, remove Key from the consoleEnter your age Videocassettes HOW to Connect Your Portable CD PlayerHOW to Connect Your Portable Stereo HOW to Connect Your Home Stereo HOW to Connect Your ComputerJack on your stereo Adapter CableHOW to Connect Your VCR Next settings of the CD or video program When you are finished using themTon or the Speed Whenkey. the program is completed, removeHOW to USE Programs Directly from OUR WEB Site Followprogram.the on-line instructions to startConsole SpeedInformation MODE/DEMO Mode Play should be blank If a dButtons on the console will not operate If a d ap Optional Chest Pulse SensorHOW to Fold the Treadmill for Storage HOW to Move the TreadmillHOW to Lower the Treadmill for USE Hold the upper end of the treadmill with your right handHold the treadmill firmly with both hands, and lower Pin CatchTroubleshooting Problem The power does not turn onProblem The power turns off during use PositionMagnet is aligned with the Reed Switch Switch is about 1/8Problem The walking belt slows when walked on Has shifted to the leftConditioning Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencySuggested Stretches Page HOW to Order Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT Part No R1102ARemove this Exploded Drawing and Part List from the Manual Key No. Qty. Description KeyDescription No. Qty. Description Drawingexploded Model
Top Page Image Contents