THE INFORMATION MODE/DEMO MODE
The console features an information mode that keeps track of treadmill usage information. The information mode also allows you to select miles or kilometers as the unit of measurement and to turn on and turn off the demo mode.
To select the information mode, hold down the Stop button while inserting the key into the console, and then release the Stop button. When the information mode is selected, the following information will be dis- played:
The priority dis- play will show the
total number of hours that the treadmill has been operated. The lower right corner of the dis- play will show the
total number of miles or kilometers that the walking belt has moved. An “E” for English miles or an “M” for metric kilometers will appear in the lower left corner of the dis- play. Press the Speed increase button to change the unit of measurement if desired.
IMPORTANT: If a “d” ap- pears in the lower left corner of the display, the console is in the “demo” mode. This mode is intended to be used
only when a treadmill is dis-
played in a store. When the console is in the demo mode, the power cord can be plugged in, the key can be removed from the console, and the indicators in the display will automatically appear in a preset sequence; the buttons on the console will not operate. If a “d” ap- pears when the information mode is selected, press the Speed decrease button so the “d” disappears.
To exit the information mode, remove the key from the console.
19