PROBLEM: The heart rate monitor does not function properly
SOLUTION: a. If the heart rate monitor does not function properly, see CHEST PULSE SENSOR TROUBLE- SHOOTING on page 9.
b. If the heart rate monitor still does not function properly, the battery should be changed. To replace the battery, first locate the battery cover on the back of the sensor unit. Insert a coin into the slot in the cover, and turn the cover counterclockwise to the “open” position. Then, remove the cover.
b
Battery Cover
Next, remove the old battery from the sensor unit, and insert a new |
|
|
|
|
|
|
|
CR 2032 battery, with the battery oriented so the writing on top. |
|
|
|
| Battery |
| |
Make sure that the rubber gasket is in place in the sensor unit. Then, |
|
|
|
| Cover |
| |
|
|
|
|
|
|
| |
reinsert the battery cover and turn it to the closed position. |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
| Battery |
|
| |
|
|
|
|
|
|
| |
Rubber
Gasket
PROBLEM: The incline of the treadmill does not change correctly
SOLUTION: a. With the key in the console, press one of the Incline buttons. Whilst the incline is changing, re- move the key. After a few seconds, reinsert the key. The treadmill will automatically rise to the maximum incline level and then return to the minimum level. This will recalibrate the incline system.
28