Healthrider H90T manual Uprights. Be careful not to pinch any wires

10. With the help of a second person, hold the con-	10			Console
sole assembly near the Uprights (77).
Connect the Upright Wire (76) to the console				Assembly
wire extending from the console assembly. See
the inset drawing. The connectors should
slide together easily and snap into place. If
they do not, turn one connector and try again. IF
THE CONNECTORS ARE NOT CONNECTED
PROPERLY, THE CONSOLE MAY BE DAM-
AGED WHEN THE POWER IS TURNED ON.
Remove the wire tie from the Upright Wire (76).
Insert the excess wire into the right Upright (77)				Console
as you set the console assembly on the
Uprights. Be careful not to pinch any wires.	77			Wire
			Wire	76
				77
		Console	Tie
		Wire
		76
11. Attach the console assembly to the Uprights	11
(77) with four 3/8" x 1 1/4" Patch Bolts (9) and
four 3/8" Star Washers (11). Start all four	Console
Patch Bolts before tightening any of them.	Assembly
	11	11	9	11
	9
	77		11	9	77
				9
	11