Healthrider H90T manual

Page 9

6.Set the console assembly face down on a soft surface to avoid scratching the console assem- bly. Identify the Right Handrail (102), which is marked with a sticker. Hold the Right Handrail near the console assembly.

Next, insert the console wire through the holes in the Right Handrail (102) as shown.

7.Attach the Left Handrail (94) and the Right Handrail (102) to the console assembly with four #8 x 1/2" Screws (2), two 3/8" x 3/4" Patch Bolts (10), and two 3/8" Star Washers (11). Do not fully tighten the Screws or Patch Bolts yet.

6

 

 

 

Console Wire

 

Console

 

 

Holes

 

 

 

102

 

Assembly

 

 

 

 

7

 

 

102

10

2

 

 

 

 

11

94

11

10

2

 

 

 

 

 

 

 

 

 

 

 

Console

 

 

 

 

Assembly

9

Image 9
Contents Model No. HMTL07508.0 Serial No QUESTIONS?Table of Contents Important Precautions Page Before YOU Begin Montaje Not fully fold the Frame until the treadmill is Make sure that the power cord is unpluggedCompletely assembled Tek Screws 4 do not overtighten the TekFully tighten the Patch Bolts yet See the inset drawing. Tie the wire tiePage Repeat this step with the Right Handrail Cover Console assembly. See the inset drawingPatch Bolts before tightening any of them Uprights. Be careful not to pinch any wires104 Page Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Features of the Console Console DiagramHOW to Turn on the Power HOW to USE the Manual ModeInsert the key into the console Follow your progress with the displays. The matrix-When you Turn on the fans if desired Measure your heart rate if desired. Before usingHOW to USE a Preset Workout Select a preset workoutStart the walking belt Select a custom workout HOW to Create a Custom WorkoutHOW to USE a Custom Workout Information Mode HOW to USE the Stereo Sound SystemMake sure that the audio wire is fully plugged HOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Lower the Treadmill for USE Problem The power turns off during use TroubleshootingImportant The treadmill is not Compatible with GFCI-equipped outletsTop Problem The walking belt slows when walked onWalking belt is off-center or slips when walked on Problem SolutionExercise Intensity Exercise GuidelinesWorkout Guidelines Exercise FrequencyKey No. Qty Description Part LIST-Model No. HMTL07508.0Qty Exploded Drawing A-Model No. HMTL07508.0 R1008A Exploded Drawing B-Model No. HMTL07508.0 R1008A Exploded Drawing C-Model No. HMTL07508.0 R1008A Exploded Drawing D-Model No. HMTL07508.0 R1008A Exploded Drawing E-Model No. HMTL07508.0 R1008A Ordering Replacement Parts