MAINTENANCE AND TROUBLESHOOTING
Inspect and properly tighten all parts of the stepper regularly. To clean the stepper, use a damp cloth and a small amount of mild detergent. Never use abra- sives or solvents; keep liquid away from the console.
HOW TO REPLACE THE BAI-I'ERY
If the console does not function properly, or if the dis- play becomes faint, the battery should be replaced. See assembly step 5 on page 5.
HOW TO ADJUST THE REED SWITCH
If the console still does not function properly, the Reed Switch (34) should be adjusted. Hold down the Left Pedal Leg (40) so that the Magnet (35) is level with the Reed Switch. Loosen the M5 x 10mm Self- tapping Screw (13). Slide the Reed Switch (34) in or out slightly. The gap between the Reed Switch and the Magnet should be about 1/8". Make sure that the Magnet will not hit the Reed Switch when the Left Pedal Leg is moved. Repeat until the console displays correct feedback. Then, retighten the Screw (13).
7