Part Identification Chart

See the drawings below to identify small parts used in assembly. The number in parentheses by each drawing is the key number of the part, from the PART LIST near the end of this manual. Note: Some small parts may have been preattached. If a part is not in the parts bag, check to see if it has been preattached.

M14 Nylon Locknut (50)

M14 Washer (68)

M12 Nylon Locknut (64)

M10 Washer (65)

M6 x 16mm Screw (51)

M4 x 25mm Self- tapping Screw (54)

M8 x 60mm Bolt (58)

M14 x 180mm Bolt (60)

M10 Nylon Locknut (67)

M10 x 65mm Screw (56)

M6 Washer (70)

M6 x 65mm Screw (59)

M8 Nylon Locknut (66)

M12 x 90mm Bolt (62)

M10 x 111mm Bolt Set (63)

M10 x 120mm Bolt (57)

M10 x 125mm Screw (53)